Turning an old cooler into a planter box is a smart way to upcycle something that’s cracked, stained, or no longer keeps things cold. The thick insulated walls make a sturdy, weatherproof container that holds soil well and protects roots from extreme temperature swings. This project takes about an hour, needs only basic tools, and works for herbs, flowers, or small vegetables.
What You’ll Need
- An old cooler (any size; larger ones hold more soil)
- A drill with a drill bit (about 1/4 inch or similar)
- A utility knife or box cutter
- Landscape fabric or a piece of window screen
- Potting soil (enough to fill the cooler)
- Plants or seeds of your choice
- Optional: small gravel or pebbles for drainage
- Optional: a permanent marker for marking holes
Step-by-Step
- Clean the cooler thoroughly. Wash it inside and out with soap and water to remove any food residue, mold, or odors. Rinse well and let it dry completely.
- Drill drainage holes. Turn the cooler upside down. Using a drill with a 1/4-inch bit, make several holes across the bottom—aim for one hole every few inches. If the cooler has a drain plug, you can remove it or leave it closed; drilling extra holes ensures water doesn’t pool.
- Cut a larger opening (optional). If you want more planting surface, use a utility knife to cut out the top lid, leaving a rim around the edge. Or simply keep the lid closed and drill holes in the top for planting—this works well for trailing plants.
- Add a drainage layer. Place a few inches of gravel or pebbles at the bottom of the cooler, above the drainage holes. This helps prevent soil from washing out and keeps the bottom from getting waterlogged.
- Line the inside. Cut a piece of landscape fabric or window screen to fit the bottom, covering the gravel. This keeps soil from sifting into the drainage layer while still allowing water to pass.
- Fill with potting soil. Add potting soil up to about an inch below the top of the cooler. Press down lightly to remove air pockets. If you’re using the lid as a planting surface, fill the cooler with soil and then cut planting holes in the lid.
- Plant your plants. Make small holes in the soil and place your plants, firming the soil around the roots. If planting seeds, follow the depth and spacing on the seed packet. Water gently after planting.
- Place the planter. Put the cooler planter in a spot that gets the right amount of sunlight for your plants. Because the cooler is insulated, it will keep the soil warmer in early spring and cooler in summer—great for root health.
Common Mistakes
- Not enough drainage holes. Too few holes means water collects at the bottom, causing root rot. Make sure you have several holes spread across the entire bottom.
- Using garden soil instead of potting mix. Garden soil compacts in containers and can carry pests or diseases. Use a lightweight potting mix designed for containers.
- Filling the cooler to the brim. Leave space at the top so water doesn’t overflow when you water. An inch of space is usually enough.
- Forgetting to clean the cooler first. Old food residue can attract pests or introduce bacteria. Always wash it thoroughly before planting.
- Cutting the lid too early. If you’re not sure how you want to use the lid, wait until after you’ve filled the cooler with soil. You can then decide whether to cut holes or leave it closed.
Tips
- Choose a cooler with a dark interior—it absorbs heat and warms the soil faster in spring.
- If your cooler has a drain plug, keep it closed to prevent soil from leaking out. The drilled holes will handle drainage.
- For a mobile planter, attach small casters to the bottom of the cooler so you can move it to follow the sun.
- Use a cooler with a lid as a self-watering planter: drill a hole in the lid for a wick (like a strip of fabric) that hangs down into a water reservoir at the bottom. This is more advanced but works well for thirsty plants.
- Paint the outside of the cooler with exterior spray paint to match your patio décor. Light colors reflect heat; dark colors absorb it—choose based on your climate.
Troubleshooting
- Water isn’t draining. If water pools on top of the soil, the drainage holes may be clogged. Check that the gravel layer isn’t blocking them. You can also add a few more holes with the drill.
- Soil keeps washing out of the holes. Make sure the landscape fabric covers the entire bottom, including the sides. If you don’t have fabric, use a piece of paper towel or a coffee filter—it will eventually break down, but it works in a pinch.
- Plants are wilting despite watering. This could be root rot from overwatering. Check that drainage is working and let the soil dry out slightly between waterings. If the cooler has no drainage at all, drill more holes immediately.
- The cooler smells bad. This usually means the inside wasn’t cleaned properly. Empty the soil, wash the cooler with a mild bleach solution (one part bleach to nine parts water), rinse thoroughly, and let it dry before replanting.
- Lid is too flimsy to hold plants. If you cut the lid and it’s bending, reinforce it with a piece of rigid plastic or wood underneath, or simply don’t use the lid—plant directly into the open cooler.
Frequently Asked Questions
Can I use a cooler that had food in it?
Yes, as long as you clean it thoroughly with soap and hot water. If it had raw meat, sanitize it with a mild bleach solution and rinse well. Once it’s clean, it’s safe for plants.
Do I need to drill holes in the sides as well as the bottom?
No, holes in the bottom are sufficient. Side holes can let soil spill out and weaken the structure. The bottom holes allow excess water to escape.
How often should I water a cooler planter?
It depends on the plants, weather, and whether the cooler is in sun or shade. Check the soil moisture by sticking your finger an inch deep—if it feels dry, water. Because the cooler is insulated, soil may stay moist longer than in a regular pot, so be careful not to overwater.
Can I grow vegetables in a cooler planter?
Yes, many vegetables like lettuce, herbs, peppers, and tomatoes can thrive in a cooler planter as long as the cooler is large enough (at least several gallons) and gets plenty of sunlight. Make sure the drainage is good.
Will the cooler melt or warp in the sun?
Most coolers are made of plastic that can withstand heat, but prolonged direct sun may cause fading or warping over time. To protect it, place the planter in partial shade during the hottest part of the day, or paint the outside with a UV-resistant spray paint.
What if I don’t have a drill?
You can use a hammer and a nail to poke holes, but it’s harder. Alternatively, use a sharp knife to cut small slits, though they may not be as clean. If you’re buying a cooler, look for one with a pre-drilled drain plug—you can simply remove the plug for drainage.