Making your own shampoo at home lets you control exactly what goes on your scalp and hair. You can avoid synthetic fragrances, sulfates, and other ingredients that may irritate sensitive skin or dry out strands. This guide covers a simple, adaptable base recipe plus variations for oily, dry, curly, and color-treated hair. You will need a few basic kitchen tools and ingredients, most of which you may already have.
What You’ll Need
- Liquid castile soap (unscented or a mild scent like lavender)
- Distilled water (or boiled and cooled tap water)
- Carrier oil (jojoba, sweet almond, or fractionated coconut oil)
- Aloe vera gel (pure, without added alcohol)
- Essential oils (optional, for scent and scalp benefits – e.g., tea tree, peppermint, lavender)
- Glass or plastic bottles with a pump or flip-top cap
- Measuring spoons and a small funnel
- A small whisk or fork for mixing
- Labels and a marker
Step-by-Step
- Sanitize your bottles. Wash the bottles and caps in hot, soapy water, then rinse thoroughly. You can also wipe the inside with rubbing alcohol and let them air dry completely. This prevents bacteria from growing in your shampoo.
- Start with the base recipe. In a measuring cup, combine one part liquid castile soap with one part distilled water. For a standard batch, use half a cup of each. This gives a gentle, low-sudsing cleanser that works for most hair types.
- Add a moisturizing agent. Stir in one teaspoon of your chosen carrier oil. Jojoba oil closely mimics the scalp’s natural sebum, while sweet almond is lighter and good for fine hair. For very dry or curly hair, you can use up to one tablespoon.
- Include aloe vera gel. Add one tablespoon of pure aloe vera gel. This helps soothe the scalp, adds slip for detangling, and can reduce frizz. Mix well until the gel is fully incorporated.
- Customize for your hair type.
- Oily hair: Use a few drops of tea tree or peppermint essential oil. These have natural astringent properties. Skip the carrier oil or reduce it to a few drops.
- Dry or damaged hair: Increase the carrier oil to one tablespoon and add a few drops of lavender or geranium essential oil. You can also add one teaspoon of honey (unless you are making it for a child under one year old – never give honey to infants).
- Curly hair: Use a little more aloe (up to two tablespoons) and a few drops of ylang-ylang or sweet orange essential oil. This helps define curls and reduce frizz.
- Color-treated hair: Keep the base simple without essential oils. Use a few drops of a light oil like argan (if you have it) and add a teaspoon of apple cider vinegar to help seal the cuticle and preserve color.
- Normal hair: Stick with the base recipe plus a few drops of lavender essential oil for a pleasant scent.
- Mix gently. Stir everything together slowly to avoid creating too many bubbles. You do not want a frothy mixture, as that makes it hard to pour.
- Transfer to bottles. Use a funnel to pour the mixture into your clean bottles. Leave a little space at the top to allow for shaking before each use.
- Label and store. Write the date and the hair type it is for on each bottle. Store in a cool, dark place, like a bathroom cabinet. Because this shampoo has no preservatives, it is best used within a few weeks. You can also keep it in the refrigerator to extend its life to about a month.
- How to use it. Shake the bottle well before each use. Wet your hair thoroughly, then apply a small amount to your scalp. Massage gently with your fingertips, working through to the ends. Rinse thoroughly with warm water. Follow with a conditioner if needed. Because castile soap can leave a slight residue on some hair, you may want to do a final rinse with a diluted apple cider vinegar solution (one tablespoon of vinegar in one cup of water) once a week to clarify.
Common Mistakes
- Using too much soap. Castile soap is concentrated. More does not mean cleaner; it can strip natural oils and leave hair feeling sticky.
- Skipping the water. Using undiluted castile soap is too harsh and will dry out your scalp. The water is essential for a balanced pH.
- Adding too much oil. A heavy hand with carrier oils can weigh down fine hair and make it look greasy. Start with a small amount and adjust.
- Not shaking before use. The ingredients can separate over time. Always shake well to recombine them.
- Using tap water without boiling. Tap water may contain minerals that react with the soap, causing a dull film. Boil it first and let it cool, or use distilled water.
- Storing in a warm, sunny spot. Heat and light can degrade the oils and encourage bacterial growth. Keep it in a cool, dark place.
Tips
- Start with a small batch. Make just a few ounces first to test how your hair responds before committing to a larger quantity.
- Adjust gradually. Your scalp may take a couple of weeks to adjust to a sulfate-free shampoo. During this transition, you might notice more oiliness or dryness – that is normal.
- Use a clarifying rinse. If you live in an area with hard water, a weekly apple cider vinegar rinse can help remove mineral buildup and restore shine.
- Keep it cool. Refrigerating your shampoo can extend its shelf life and feels refreshing in warm weather.
- Add a preservative. A few drops of vitamin E oil or grapefruit seed extract can help prevent rancidity, but they are not a substitute for proper storage.
- Do not overdo essential oils. A few drops are enough. They are potent and can irritate the scalp if used in excess.
Troubleshooting
- My hair feels greasy after washing. This usually means you used too much oil or the soap was not diluted enough. Try reducing the carrier oil to a few drops and increasing the water slightly. Also, make sure you rinse extremely thoroughly.
- My hair feels dry or straw-like. You may have used too much castile soap or not enough moisturizing ingredients. Increase the aloe vera gel and carrier oil slightly, and consider a weekly deep conditioning treatment.
- The shampoo leaves a film or residue. This can happen with hard water. Use distilled water in the recipe and try the apple cider vinegar rinse. If the problem persists, reduce the amount of castile soap.
- The mixture separates quickly. This is normal. Shake well before each use. If it separates within minutes, you may have added too much oil – try using a few drops less next time.
- My scalp itches or feels irritated. Stop using the shampoo immediately. You may be sensitive to one of the essential oils or the castile soap. Try a patch test on your inner arm before the next use. If irritation continues, see a dermatologist.
- The shampoo smells off. If it develops a sour or rancid odor, discard it. This means the oils have gone bad or bacteria have grown. Make a fresh batch and store it in the fridge.
Frequently Asked Questions
- Can I use this shampoo on kids? Yes, but omit essential oils and keep the formula very mild. For babies under one year, avoid honey entirely and use only the basic castile soap and water mixture.
- How often should I wash with homemade shampoo? Most people can use it every other day or a few times a week. Listen to your scalp – if it feels dry, reduce frequency; if it gets oily quickly, you might need to wash more often.
- Will this shampoo lather like store-bought? No, it will produce a low, creamy lather rather than big bubbles. This is normal for sulfate-free shampoos. You may need to use a bit more product to feel it spread through your hair.
- Can I use this on color-treated hair? Yes, but be gentle. The apple cider vinegar rinse can help preserve color, but avoid using it too frequently as it may strip some color over time. Always do a strand test first.
- How long does homemade shampoo last? Stored in a cool, dark place, it should last about two weeks. In the refrigerator, it can last up to a month. Always check for any change in smell or texture before using.
- Can I add other ingredients like honey or eggs? Honey can be added for moisture (but not for infants under one year). Eggs are not recommended because they can spoil quickly and may leave a residue. Stick to the oils and aloe vera for safety.
Homemade Shampoo for Every Hair Type