Outdoor Faucet Covers: How to Install Them

Outdoor faucet covers (also called spigot covers or hose bib covers) protect your outdoor water spigot from freezing temperatures. When water inside the pipe freezes, it expands and can crack the pipe or the faucet itself, leading to costly repairs. A simple foam or insulated cover helps keep the cold air away from the faucet and slows heat loss, giving your pipes a much better chance of surviving winter. This guide walks you through the whole process, from choosing the right cover to installing it correctly, plus common mistakes and troubleshooting.

What You’ll Need

  • An outdoor faucet cover (foam, insulated, or hard plastic) that fits your spigot size
  • A dry cloth or rag
  • A hose (if you need to drain the line first)
  • Optional: a bucket or container to catch water when draining
  • Optional: pipe insulation tape or foam pipe insulation for extra protection

Step-by-Step

  1. Shut off the water supply to the outdoor faucet. Look for a valve inside your home, usually in the basement, crawl space, or utility room, that controls water to the outside spigot. Turn it clockwise until it’s fully closed. If you can’t find a dedicated valve, you may need to shut off the main water supply to the house.
  2. Open the outdoor faucet to drain any remaining water. Turn the handle counterclockwise to open it fully. Let any water in the pipe drain out. Place a bucket under the faucet to catch drips. Leave the faucet open for a few minutes to ensure it’s fully drained.
  3. Disconnect any attached hoses. If a garden hose is connected, unscrew it and let it drain completely. Store the hose indoors if possible. Leaving a hose attached can trap water and cause freezing.
  4. Close the outdoor faucet. Once the water has stopped draining, turn the handle clockwise to close it. This prevents any residual water from sitting in the faucet.
  5. Dry the faucet and the surrounding pipe. Use a dry cloth to wipe off any moisture or dirt from the faucet and the pipe leading to it. A clean, dry surface helps the cover fit snugly and prevents ice from forming.
  6. Attach the cover. Slide the cover over the faucet, making sure it fully encloses the spigot. Most covers have a drawstring, Velcro strap, or a rigid backplate that you can tighten. Pull the strap or drawstring snugly so the cover fits tightly against the wall or pipe. The goal is to create a seal that keeps cold air out.
  7. Check the fit. Make sure the cover is secure and not loose. It should cover the entire faucet, including the handle, and extend a few inches up the pipe if possible. If the cover has a hole for the handle, ensure the handle is inside the cover, not sticking out.
  8. Add extra insulation if needed. In very cold climates, you can wrap pipe insulation tape around the exposed pipe leading to the faucet before attaching the cover. This adds a layer of protection. Just be careful not to cover any shut-off valve or drain.
  9. Inspect the cover periodically. After heavy snow or strong winds, check that the cover hasn’t blown off or shifted. Re-tighten if necessary.

Common Mistakes

  • Forgetting to shut off the water and drain the pipe. A cover alone is not enough if the pipe still has water in it. Always shut off the supply and drain the faucet before putting on the cover.
  • Leaving a hose attached. A hose traps water in the faucet and pipe, increasing the risk of freezing. Always disconnect and drain hoses.
  • Using a cover that’s too small. A cover that doesn’t fully enclose the faucet leaves parts exposed to cold air. Measure your faucet or choose a cover that fits standard spigots.
  • Not tightening the cover. A loose cover allows cold air to enter. Make sure the drawstring or strap is snug.
  • Putting the cover on a wet faucet. Moisture can freeze and cause the cover to stick or trap ice against the metal. Dry the faucet first.
  • Forgetting to remove the cover in spring. Leaving the cover on during warm months can trap moisture and cause rust. Remove it when temperatures stay above freezing.

Tips

  • Choose a cover made of thick foam or with a hard outer shell and insulation. These provide better protection than thin plastic.
  • If your faucet is in a very exposed area, consider using a cover with a built-in heating element (if you have a nearby outlet) for extra safety, but always follow the manufacturer’s instructions.
  • For extreme cold, you can also wrap the cover with an old towel or blanket for added insulation, but make sure it stays dry.
  • If you have a frost-proof (or freeze-proof) sillcock, you may not need a cover, but it’s still a good idea to disconnect hoses and drain the line.
  • Install the cover before the first hard freeze, not after. Check your local weather forecast and prepare in advance.

Troubleshooting

  • The cover keeps falling off. If the cover won’t stay on, it may be too big. Try a different size or use a bungee cord or zip tie to secure it (but don’t overtighten and damage the faucet). Alternatively, you can use foam pipe insulation tape to build up the area around the faucet so the cover fits more snugly.
  • Water drips from the faucet after you’ve closed it. This means the valve inside is not sealing completely. You may need to replace the washer or the entire faucet. For now, you can still use the cover, but you should address the leak to prevent ice buildup.
  • The cover is frozen to the faucet. Do not force it off. Gently warm the area with a hair dryer on low heat (keep it moving) or pour warm (not boiling) water over the cover to loosen the ice. Then remove it.
  • You notice a crack in the pipe or faucet. If you see a crack, turn off the water supply immediately and call a plumber. Do not attempt to use the faucet.
  • The cover doesn’t fit because the faucet is recessed or angled. Look for a cover designed for odd angles or use a universal cover with a flexible skirt. You can also build a small insulated box around the faucet using foam board and tape.

Frequently Asked Questions

Do I really need a faucet cover? If you live in a region where temperatures drop below freezing, yes. Even one freezing night can crack a pipe. A cover is a cheap and easy insurance policy.

Can I use a faucet cover on a frost-proof faucet? Yes, but it’s not always necessary. Frost-proof faucets are designed to drain themselves, but they can still freeze if a hose is left attached or if the slope is wrong. A cover adds extra protection.

How do I know what size cover to buy? Most standard outdoor faucets are the same size, but you can measure the width of the spigot and the distance from the wall to the end of the faucet. Covers are usually labeled as ‘standard’ or ‘large.’ When in doubt, choose a slightly larger cover.

Should I leave the faucet open or closed when the cover is on? You should close the faucet after draining. Leaving it open can allow warm air to escape from your home, and it doesn’t help with freezing.

Can I make my own faucet cover? Yes, you can wrap the faucet in foam pipe insulation and then cover it with a plastic bag secured with tape or a zip tie. It’s not as neat as a commercial cover, but it can work in a pinch.

When should I remove the cover? Remove it in spring when nighttime temperatures consistently stay above freezing. Leaving it on during warm months can trap moisture and cause rust.

Outdoor Faucet Covers: How to Install Them

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to top