Keeping a small set of reliable tools at home saves you time, money, and the hassle of waiting for a professional for minor fixes. From tightening a loose doorknob to patching a small hole in drywall, most common repairs are well within your ability if you have the right equipment. This guide covers the essential tools every household should own, what each one is used for, and how to use them safely and effectively.
What You’ll Need
- Claw hammer (for driving and removing nails)
- Screwdriver set (flathead and Phillips, in several sizes)
- Adjustable wrench (for nuts and bolts)
- Pliers (needle-nose and slip-joint)
- Tape measure (at least a few feet long)
- Utility knife with retractable blade
- Level (small torpedo level or a standard one)
- Drill with a set of drill bits and screwdriver bits (optional but very helpful)
- Flashlight
- Safety glasses and work gloves
Step-by-Step
- Assess the repair. Before picking up any tool, look at what needs fixing. Is a screw loose? Is a hinge squeaking? Is there a crack or hole? Knowing the problem helps you choose the right tool and approach.
- Gather the correct tools. For a loose screw, you need a screwdriver that fits the head snugly. For a leaking pipe, you may need an adjustable wrench. For a picture frame that tilts, you need a level and a screwdriver. Match the tool to the task.
- Prepare the work area. Clear the space around the repair. If you’re working on a wall, move furniture away and lay down a drop cloth. If you’re working on a door, make sure it won’t swing and hit anything.
- Use the hammer correctly. Grip the handle near the end for maximum leverage. Hold the nail in place with your other hand, tap it gently to start, then drive it in with firm, controlled swings. For removing nails, use the claw side and pull straight out.
- Drive screws with the right technique. Choose a screwdriver that fills the screw head completely. Apply firm downward pressure while turning clockwise to tighten, counterclockwise to loosen. If the screw is stubborn, use a drill with a screwdriver bit at low speed.
- Tighten nuts and bolts with a wrench. Slip the wrench over the nut and turn clockwise to tighten, counterclockwise to loosen. For stubborn nuts, apply steady pressure rather than jerking. Use the adjustable wrench to fit the nut snugly without rounding the edges.
- Cut materials with a utility knife. Always extend the blade just enough to cut through the material. Score along a straightedge, then snap the material if it’s drywall or thin wood. Keep your fingers clear of the blade path.
- Measure twice, cut once. Use the tape measure to get accurate dimensions. Hook the end over the edge, pull the tape taut, and read the measurement at the exact point you need. Write it down rather than relying on memory.
- Check for level. Place the level on the surface you’re adjusting—a shelf, a picture frame, a washing machine. Adjust until the bubble sits centered between the lines. This ensures things hang straight and function properly.
- Drill pilot holes when needed. For screws going into wood, especially near edges, drill a small pilot hole first to prevent splitting. Use a drill bit slightly smaller than the screw’s shaft. Then drive the screw with a screwdriver bit.
- Clean up and store tools. After the repair, wipe off any dust or debris, return tools to their designated spots, and dispose of any broken parts safely. Proper storage prevents rust and keeps tools ready for next time.
Common Mistakes
- Using the wrong size screwdriver—this strips the screw head and makes it impossible to turn.
- Overtightening screws or nuts, which can strip threads or crack the material.
- Hammering without eye protection—debris can fly.
- Cutting toward yourself with a utility knife—always cut away from your body.
- Skipping the level and ending up with crooked shelves or frames.
- Forgetting to turn off the power or water before working on electrical or plumbing repairs—always shut off the supply first.
Tips
- Invest in a quality set of screwdrivers with comfortable handles; they last for years.
- Use a magnetic screwdriver to hold screws in place when working in tight spots.
- Lubricate squeaky hinges with a few drops of oil, then wipe away excess.
- For stripped screws, place a rubber band over the head and press the screwdriver in—this often provides enough grip.
- Keep a small magnet in your toolbox to pick up dropped screws and nails.
- If you’re not sure about a repair, watch a tutorial or consult a professional—better safe than sorry.
Troubleshooting
The screw won’t turn. Try a larger screwdriver or use a drill with a bit. If the head is stripped, use a screw extractor or a rubber band trick. If it’s still stuck, apply penetrating oil and wait a few minutes.
The nail bends while hammering. Remove it and start with a new nail. Hold the nail with pliers for better control, and use a lighter touch—let the hammer do the work.
The wrench slips off the nut. The wrench is likely too large. Adjust it to fit snugly, and pull toward yourself rather than pushing away. If the nut is rounded, use a socket wrench or locking pliers.
The level doesn’t show level. Make sure the level is clean and not damaged. Check it against a known flat surface. If it’s off, replace it—a faulty level causes more problems.
The utility knife won’t cut. The blade is likely dull. Replace it with a fresh one. Always use a sharp blade—dull blades require more force and are more dangerous.
The drill bit slips. Ensure the bit is tightly secured in the chuck. Use a center punch to make a small indentation for the bit to start. For hard surfaces, start with a pilot hole.
Frequently Asked Questions
Q: Do I need a power drill? A: Not strictly, but it makes many repairs faster and easier, especially when driving multiple screws or drilling holes. A cordless drill with a couple of batteries is a good investment.
Q: What’s the difference between a flathead and Phillips screwdriver? A: Flathead has a single slot, Phillips has a cross shape. Use the one that matches the screw head—using the wrong type will strip the head.
Q: How do I choose the right size wrench? A: The wrench should fit the nut snugly without any play. Adjustable wrenches can adapt to various sizes, but for heavy-duty work, a fixed-size wrench is more reliable.
Q: Can I use a hammer for everything? A: No. Hammers are for driving nails and light demolition. Using them on other materials can damage the tool or the surface. Use the right tool for the job.
Q: How often should I replace my tools? A: Quality tools can last for years if maintained. Replace any tool that is cracked, bent, or has a loose handle. Sharp blades should be replaced when they become dull.
Q: Is it safe to do electrical repairs myself? A: Simple tasks like replacing a light switch are often safe if you turn off the power at the breaker. For anything involving wiring in the walls, call a licensed electrician.