Sun printing, also known as cyanotype, is a photographic printing process that uses sunlight to create beautiful blue-and-white images on fabric. It’s a simple, chemical-based method that requires no camera or darkroom—just light-sensitive solution, natural objects, and a sunny day. This guide walks you through the entire process, from preparing your fabric to troubleshooting common issues, so you can create unique, handmade textiles for quilts, tote bags, or wall art.
What You’ll Need
- Fabric: natural fibers like cotton, linen, or silk (pre-washed, no softeners)
- Cyanotype solution: a two-part kit (sensitizer A and B) or a pre-mixed solution
- Foam brush or sponge brush
- Cardboard or foam board (larger than your fabric)
- Plastic tablecloth or trash bag to protect your work surface
- Glass pane or acrylic sheet (to hold objects flat)
- Natural objects: leaves, flowers, feathers, or other flat items
- Large bowl or container for rinsing
- Running water (sink or hose)
- Mild detergent or dish soap
- Rubber gloves and protective eyewear
- Old clothes or apron
- Drying rack or clothesline
Step-by-Step
- Prepare your workspace. Cover a flat surface with plastic. Mix the cyanotype solution according to the kit’s instructions—usually equal parts of solution A and B in a small container. Stir gently, then let it rest for about an hour to de-bubble.
- Pre-wash your fabric. Wash the fabric in hot water with mild detergent (no fabric softener) to remove any sizing or residues. Dry it completely and iron out wrinkles. This ensures the solution absorbs evenly.
- Cut fabric to size. Cut your fabric to the desired shape, but make sure it fits on your cardboard or foam board with a few inches to spare.
- Apply the sensitizer. Wearing gloves, use the foam brush to coat the fabric evenly with the cyanotype solution. Work in a dimly lit room (no direct sunlight) to prevent premature exposure. Apply in long, even strokes, covering the entire surface. The fabric will turn yellow-green—that’s normal.
- Dry in darkness. Place the coated fabric on the cardboard and let it dry in a dark, well-ventilated area. This can take from a few minutes to an hour, depending on humidity. Keep it away from sunlight until you’re ready to expose.
- Arrange your objects. Once dry, place the fabric on a flat board in direct sunlight. Arrange your leaves, flowers, or other objects on top of the fabric. Get creative with layering or patterns. If you want white outlines, use opaque objects; for softer edges, use translucent items.
- Cover with glass. Place the glass pane over the objects to keep them flat and in contact with the fabric. This prevents wind or curling from blurring the image.
- Expose to sunlight. Leave the setup in direct sunlight. Exposure time varies with sun intensity and season—typically from a few minutes to half an hour. Watch the fabric: it will change from yellow-green to a grayish-blue. When the exposed areas turn a dark slate blue, the print is ready. Overexposure can cause loss of detail, so err on the side of shorter exposure.
- Rinse in water. Remove the glass and objects. Immediately rinse the fabric under running water (cold or lukewarm) until the water runs clear. This washes away the unexposed chemicals. Then, soak the fabric in a bowl of water with a few drops of mild detergent for a few minutes to neutralize the solution.
- Final rinse and dry. Rinse again under running water, then hang the fabric to dry in a shaded, airy place. The blue will deepen as it dries. Once dry, iron if desired.
Common Mistakes
- Skipping the pre-wash: Fabric with residues or finishes can repel the solution, leading to uneven prints.
- Applying solution in bright light: Even indoor light can start the reaction, causing faint or washed-out prints.
- Too much solution: A thick, gloppy coat takes longer to dry and can leave streaks. Use a thin, even layer.
- Exposing too long: Overexposure makes the blue very dark and can obscure the white detail of your objects.
- Not rinsing thoroughly: Leftover chemicals can continue to develop in the dark, turning the whole fabric blue over time.
Tips
- Use fresh, dry leaves and flowers. Wet or thick items may not lie flat and can cast blurry shadows.
- For sharper images, press your botanicals flat in a book for a few days before printing.
- Experiment with different fabrics: cotton muslin gives a soft, vintage look; silk produces a crisp, luminous print.
- If you want a multi-color effect, try applying the solution selectively with a brush or stencil, but note that this requires more advanced technique.
- Keep a notebook to record exposure times and weather conditions—it’ll help you refine your process.
Troubleshooting
- Print is too light or faint: Increase exposure time, but check that you’re using direct sunlight (not through a window). Also, ensure the solution is fresh—old chemicals lose potency.
- Print is too dark or all blue: Reduce exposure time. Also, make sure your objects are fully opaque and pressed tightly against the fabric.
- Streaks or blotches: This usually means the solution was applied unevenly. Next time, use a smoother brush stroke and make sure the fabric is completely dry before exposing.
- Fabric turns blue in the dark: This indicates incomplete rinsing. Rewash the fabric in lukewarm water with detergent, then rinse again thoroughly.
- Image is blurry: Your objects may have shifted during exposure. Use the glass pane and avoid windy days. Also, ensure the fabric is flat and not wrinkled.
Frequently Asked Questions
Can I use any fabric?
Natural fibers work best—cotton, linen, silk, and hemp. Synthetic fibers like polyester don’t absorb the solution well and produce faint prints.
Do I need to wash the fabric after printing?
Yes, rinsing is essential to stop the chemical reaction and remove unexposed solution. A final wash with mild detergent ensures the fabric is safe to use and won’t fade over time.
How long does a sun print last?
With proper rinsing and care, a cyanotype print is permanent. It will not fade in normal indoor light, but prolonged direct sunlight can gradually lighten the blue over many years.
Can I print on dark fabric?
No, the cyanotype process works only on light-colored fabrics because the blue dye is transparent. Use white or very pale fabrics for best results.
Can I reuse the cyanotype solution?
Once mixed, the solution is light-sensitive and will degrade over time. Use it within a few days and store it in a dark, airtight container. It’s not recommended to reuse leftover solution after exposure.
What if I don’t have natural objects?
You can use any flat, opaque items—keys, lace, paper cutouts, or even found objects like coins or leaves from the garden. The key is that they block light to create white silhouettes.