After a long winter, your lawn mower needs a little attention before it takes on the season’s growth. Proper spring maintenance ensures reliable starting, a clean cut, and a longer machine life. This guide walks you through the essential checks and tasks—from fuel and oil to the blade and air filter—so your mower is ready when the grass starts growing. Before you begin, gather your tools and safety gear, and make sure the mower is cool and the spark plug wire is disconnected to prevent accidental starting.
What You’ll Need
- Socket wrench or spark plug wrench
- New spark plug (check your owner’s manual for the correct type)
- Engine oil (recommended type and amount per manual)
- Fresh gasoline (if your mower is gas-powered)
- Air filter (foam, paper, or both, depending on model)
- Blade removal tools (socket wrench, block of wood)
- File or grinder for sharpening the blade
- Wire brush or scraper for under-deck cleaning
- Safety glasses and gloves
- Clean rag and mild detergent
- Fuel stabilizer (if storing with fuel)
Step-by-Step
- Disconnect the spark plug wire. Pull the rubber boot off the spark plug and secure it away from the plug. This prevents the engine from accidentally starting while you work.
- Clean the mower exterior. Use a rag and mild detergent to wipe down the housing, handles, and wheels. Remove any grass clippings, dirt, and debris. This also helps you spot cracks or damage.
- Remove and replace the spark plug. Use a spark plug wrench to unscrew the old plug. Inspect it: a tan or gray tip is normal; black, oily, or worn electrodes mean it’s time for a new one. Gap the new plug to your engine’s specification (usually found in the manual), then screw it in by hand to avoid cross-threading, and tighten with the wrench.
- Change the engine oil. Run the mower for a few minutes to warm the oil (or skip if it’s cold). Place a drain pan under the oil drain plug, remove the plug, and let the oil drain completely. Replace the plug, then add fresh oil through the fill tube, checking the dipstick. Do not overfill.
- Replace or clean the air filter. Locate the air filter housing (usually a black cover on the side of the engine). Remove the cover, take out the filter, and clean or replace it. Foam filters can be washed with soapy water, rinsed, and lightly oiled; paper filters should be replaced if dirty or damaged.
- Inspect and sharpen the blade. Tilt the mower on its side (with the air filter and carburetor facing up) and block the blade to keep it from turning. Remove the blade bolt with a socket wrench. Check the blade for nicks, cracks, or excessive wear. Sharpen it with a file or grinder, maintaining the original angle. Balance the blade (a blade balancer helps) before reinstalling, then tighten the bolt securely.
- Clean the under-deck. While the mower is on its side, scrape off any built-up grass and debris from the underside of the deck. This improves airflow and prevents rust. Use a wire brush or putty knife.
- Check the fuel system. If you left fuel in the tank over winter, drain it and replace with fresh gasoline. If the fuel is old (more than a few months), it can cause starting issues. Consider adding a fuel stabilizer to fresh fuel to prevent future problems.
- Inspect cables and wheels. Check the throttle and drive cables for fraying or stiffness. Lubricate pivot points with a light oil. Ensure wheels spin freely and adjust their height if needed.
- Reconnect the spark plug wire and test. Once everything is in place, reconnect the wire, add fresh fuel if needed, and start the mower. Let it run for a minute to ensure smooth operation and check for any leaks.
Common Mistakes
- Skipping the oil change. Old oil loses its lubricating properties and can damage the engine. Always change it at the start of the season.
- Ignoring the air filter. A clogged filter restricts airflow, causing poor performance and increased fuel consumption.
- Dulling the blade. A dull blade tears grass instead of cutting it, leading to a brown, ragged lawn. Always sharpen before the first mow.
- Forgetting to disconnect the spark plug. This is a safety hazard—always disconnect before any maintenance.
- Using old fuel. Stale fuel can gum up the carburetor. Drain it if it’s been sitting for months.
- Over-tightening bolts. Stripped threads are a common issue. Use a torque wrench if possible, or just snug the bolts firmly.
Tips
- Keep a maintenance log with dates and tasks performed—it helps you stay on schedule.
- Store your mower in a dry place, and consider using a cover to protect it from dust.
- If you’re not comfortable working on the blade, many hardware stores offer sharpening services.
- Check the owner’s manual for specific intervals—some mowers require more frequent oil changes.
- Use a fuel stabilizer year-round if you store the mower for more than a few weeks.
Troubleshooting
- Mower won’t start. Check the spark plug connection, fuel level, and that the fuel is fresh. If the plug is wet after trying to start, it may be flooded—wait a few minutes and try again with the choke open.
- Engine runs rough or stalls. Clean or replace the air filter, and check the fuel for water or debris. Also, inspect the spark plug gap and condition.
- Vibration during mowing. This usually means the blade is unbalanced or damaged. Remove the blade, check for bends or cracks, and rebalance it.
- Oil leaks. Check the drain plug and the oil filter (if present) for tightness. Also, ensure you didn’t overfill the oil—excess can cause leaks.
- Poor cut quality. Sharpen the blade and clean the under-deck. Also, check tire pressure—uneven tires can cause an uneven cut.
- Smoke from engine. A little smoke on first start is normal as oil burns off. If it persists, check for overfilled oil or a clogged air filter.
Frequently Asked Questions
- How often should I change the oil? Most manufacturers recommend changing the oil at least once per season or after every many hours of use, whichever comes first. Check your manual.
- Can I use car oil in my mower? It’s best to use the oil type recommended by the manufacturer, often a high-detergent oil with the proper viscosity. Car oil may work, but it’s safer to follow the manual.
- Do I need to sharpen the blade every year? Yes, sharpening at the start of the season is a good practice. If you mow frequently or hit rocks, you may need to sharpen more often.
- What should I do if I forgot to drain the fuel over winter? Drain the old fuel and replace it with fresh. If the mower still won’t start, you may need to clean the carburetor—a service shop can help.
- Is it necessary to replace the spark plug annually? It’s a good idea, as spark plugs wear out and can cause hard starting. A new plug is inexpensive and ensures reliable ignition.
- Can I wash my mower with a hose? You can, but avoid spraying directly into the engine, air filter, or exhaust. It’s better to wipe down the exterior and clean the under-deck with a scraper to prevent water damage.
Spring Lawn Mower Maintenance: Step-by-Step Guide