Spider mites are tiny sap-sucking pests that can turn a lush Japanese aralia (Fatsia japonica) into a stippled, webbed mess. This guide walks you through identifying the damage, treating the plant, and preventing a recurrence. You’ll need a few common household items and a bit of patience.
What You’ll Need
- Magnifying glass or a phone camera with zoom (to confirm mites)
- Spray bottle or garden sprayer
- Mild liquid soap (like castile soap) or insecticidal soap
- Water (room temperature)
- Clean, soft cloth or paper towels
- Pruning shears (for removing severely damaged leaves)
- Optional: neem oil or horticultural oil
Step-by-Step
- Confirm spider mites. Look for fine webbing on the undersides of leaves and along stems. Tap a leaf over a white sheet of paper; if tiny specks fall and move, they are mites. Use a magnifying glass to see them—they are about the size of a grain of sand.
- Isolate the plant. Move the aralia away from other houseplants to prevent the mites from spreading. If it’s outdoors, keep it separate from other plants until the infestation is gone.
- Prune heavily damaged leaves. Remove leaves that are more than half yellowed, bronzed, or covered in dense webbing. Dispose of them in a sealed bag—do not compost, as mites can survive.
- Rinse the plant. Take the aralia to a sink or shower and spray the foliage with a strong stream of lukewarm water, focusing on the undersides of leaves. This knocks off many mites and washes away some webbing.
- Mix a soap solution. In a spray bottle, combine about one tablespoon of mild liquid soap per quart of water (or follow the label on a commercial insecticidal soap). Shake gently.
- Spray thoroughly. Coat every leaf surface, especially the undersides, until the solution drips off. Also spray the stems and the top layer of soil. Do this in the morning or evening to avoid leaf burn if the plant is in direct sun.
- Wipe down leaves. Use a soft cloth or paper towel to gently wipe each leaf, removing any remaining mites and eggs. This is tedious but highly effective.
- Repeat the treatment. Spider mite eggs hatch over several days, so repeat the soap spray every few days for at least two weeks. Continue until you see no new damage or webbing.
- Increase humidity. Spider mites thrive in dry conditions. Mist the plant regularly, place a humidifier nearby, or set the pot on a tray of wet pebbles. This discourages mites and helps the aralia recover.
- Monitor and maintain. Check the undersides of leaves weekly for the next month. At the first sign of new stippling or webbing, repeat the rinsing and spraying steps.
Common Mistakes
- Only spraying the tops of leaves. Mites live mostly on the undersides; you must target them there.
- Using too strong a soap solution. This can burn the leaves. Always dilute as directed and test on a small area first.
- Stopping treatment too early. Missing one round of spraying allows the next generation to survive and rebuild the population.
- Ignoring the plant’s stress. A weakened aralia is more susceptible. Ensure it has proper light, water, and nutrients.
- Not isolating the plant. Mites can hitchhike on your hands or tools to other plants.
Tips
- Use a magnifying glass to spot mites early—before they cause visible damage.
- Keep the aralia’s leaves dust-free by wiping them monthly; dust reduces humidity and makes the plant more inviting to mites.
- If you prefer a non-soap method, neem oil works well, but apply it in the evening to avoid leaf burn.
- During hot, dry weather, check your aralia more often, as spider mite outbreaks are common then.
- For severe infestations, consider a biological control like predatory mites, available from garden centers—but follow the release instructions carefully.
Troubleshooting
Damage persists after treatment. You may be missing eggs or new hatchlings. Increase the frequency of spraying and be more thorough with undersides. Also, ensure your soap solution is fresh—old solutions lose effectiveness.
Leaves are getting burned. If you see brown, crispy patches after spraying, you may be using too much soap or spraying in direct sunlight. Rinse the plant with plain water and dilute the soap further.
Mites keep coming back. The plant may be stressed (too dry, too dark, or over-fertilized). Improve its growing conditions and continue regular monitoring. Also, check nearby plants for a hidden reservoir of mites.
Plant looks worse after pruning. Heavy pruning can shock an already stressed aralia. Reduce the amount you remove at once, and ensure the plant has adequate humidity and water afterward.
Soap spray doesn’t seem to work. Some soaps are not effective against mites. Switch to a commercial insecticidal soap or try neem oil. Always follow the label instructions.
Frequently Asked Questions
How do I know if my aralia has spider mites? Look for fine webbing, tiny yellow or white speckles on leaves, and a general dusty appearance. Tap a leaf over white paper—if specks move, they are mites.
Can spider mites kill a Japanese aralia? Yes, if left untreated, heavy infestations can cause leaf drop and weaken the plant to the point of death. Early treatment is key.
Are spider mites harmful to humans? No, they do not bite humans or pets. They are plant pests only.
How long does it take to get rid of spider mites? With consistent treatment every few days, you can usually see improvement within a couple of weeks. Full eradication may take several weeks.
Can I use rubbing alcohol to kill spider mites? Yes, a diluted solution (one part alcohol to three parts water) can be sprayed on the plant, but test on a small leaf first. Avoid using it in direct sun, as it can burn foliage.
Should I repot my aralia after a spider mite infestation? Usually not necessary, as mites live on the foliage, not in the soil. However, you can replace the top inch of soil to remove any fallen mites or eggs.