Raccoon Paper Bag Puppet: Easy Step-by-Step Craft

This craft turns a plain lunch bag into a playful raccoon puppet. It’s a great activity for kids, classroom projects, or a rainy afternoon. You’ll practice cutting, gluing, and layering shapes, and end up with a puppet you can use for storytelling or imaginative play. Before you start, gather your materials and cover your work surface with newspaper or a plastic tablecloth.

What You’ll Need

  • One paper lunch bag (the kind with a flat bottom and a fold-over flap)
  • Construction paper in gray, black, white, and pink
  • Scissors
  • Glue stick or white school glue
  • Black marker or crayon
  • Optional: googly eyes, cotton balls, or yarn for extra detail

Step-by-Step

  1. Prepare the bag. Lay the paper bag flat with the folded flap facing you. The flap will become the raccoon’s mouth. If the bag has any printing on it, turn it so the plain side is facing up.
  2. Cut the face shapes. From gray paper, cut an oval about the size of your palm—this will be the raccoon’s head. From black paper, cut a mask shape: two oval eye patches connected by a narrow strip that fits across the nose area. Also cut two small circles for ears. From white paper, cut a smaller oval for the muzzle and two small triangles for the inner ears. From pink paper, cut a tiny oval for the nose.
  3. Attach the head. Glue the gray oval onto the bag’s flap, centered and slightly above the bottom edge. Press firmly and let it dry for a minute.
  4. Add the mask. Glue the black mask shape onto the gray head, positioning it so the strip sits where the eyes will be. The mask should cover the area just above the nose and extend to the sides.
  5. Create the eyes. If you have googly eyes, glue them onto the black mask. Otherwise, cut two small white circles and two smaller black circles from paper, and glue the black ones onto the white ones. Glue these onto the mask.
  6. Add the muzzle and nose. Glue the white oval muzzle onto the lower part of the head, overlapping the bottom of the mask. Glue the pink nose on top of the muzzle, centered.
  7. Attach the ears. Glue the gray ear circles to the top corners of the head. Then glue the pink or white inner ear triangles onto the gray ears.
  8. Draw the mouth. Using the black marker, draw a small smile or a simple line below the nose on the muzzle. You can also draw whiskers on the sides of the muzzle.
  9. Add the body (optional). If you want a more detailed puppet, cut a gray oval for the body and glue it to the front of the bag below the flap. Add a white belly patch and a few gray stripes on the sides. Let everything dry completely.
  10. Let it dry and play. Once all glue is dry, your puppet is ready. To make it talk, place your hand inside the bag and push the flap up and down. The mouth will open and close.

Common Mistakes

  • Putting the head too low. If the gray head is glued too close to the bottom edge of the flap, the puppet’s mouth won’t open fully. Leave a small gap between the head and the flap’s edge.
  • Using too much glue. Excess glue can make the paper wrinkle or stick to itself. Use a thin, even layer.
  • Cutting the mask too small. The mask needs to be wide enough to cover both eyes and the bridge of the nose. If it’s too narrow, it looks like a bandit mask instead of a raccoon’s face.
  • Forgetting to let the glue dry. If you play with the puppet before the glue is dry, the pieces may slide or fall off. Wait a few minutes after gluing.

Tips

  • Use a pencil to lightly draw the shapes on construction paper before cutting—this helps you get the sizes right.
  • For younger kids, pre-cut the shapes or draw them on the paper so they can cut along the lines.
  • Make the raccoon’s tail by cutting a long strip of gray paper with black stripes and gluing it to the back of the bag.
  • Add a tongue by cutting a small red or pink oval and gluing it inside the flap, so it shows when the mouth opens.
  • If you don’t have gray paper, color a white piece with a gray crayon or use a brown bag and color over it.
  • Use a hole punch to make perfect circles for the eyes or nose.

Troubleshooting

  • The puppet’s mouth doesn’t open. This usually means the head is glued too low or the flap is stuck. Check that the flap is free and the head is not covering the fold. If needed, gently peel off the head and re-glue it higher.
  • Pieces keep falling off. The glue may not be strong enough or it’s too wet. Try using a glue stick instead of liquid glue, or press the pieces down for a few seconds. You can also use a small piece of tape on the back of the pieces as a temporary fix.
  • The paper tears when cutting. Use scissors that are sharp (but safe for kids) and cut slowly. If a piece tears, simply cut a new one.
  • The mask doesn’t look right. If the mask is too wide or too narrow, cut a new one. It should look like two eye patches connected by a strip that sits over the bridge of the nose.
  • The puppet looks more like a cat than a raccoon. Raccoons have a distinct black mask and a white muzzle. Make sure the mask is prominent and the muzzle is large enough. Add a few gray stripes on the sides of the head to make it look more raccoon-like.

Frequently Asked Questions

  • Can I use a brown paper bag instead of a white one? Yes, a brown bag works fine. The colors of the raccoon will still show, but the brown may show through if you use thin paper. You can color the bag gray first or use a thicker layer of construction paper.
  • What kind of glue works best? A glue stick is easiest for kids and dries quickly. White school glue is stronger but takes longer to dry. Avoid hot glue unless an adult is helping, as it can burn.
  • How long does the puppet take to make? It usually takes about half an hour, plus drying time. If you pre-cut the pieces, it can be faster.
  • Can I make the puppet without googly eyes? Absolutely. Just cut out white and black circles from paper. Googly eyes are optional and only for extra fun.
  • Is this suitable for a preschooler? Yes, with adult help for cutting. You can pre-cut the shapes and let the child glue them on. The puppet is simple enough for young kids to enjoy.
  • Can I use felt or fabric instead of paper? Yes, felt works well and is more durable. You’ll need fabric glue or a hot glue gun (with adult supervision). The puppet will be sturdier and can be used multiple times.
Raccoon Paper Bag Puppet: Easy Step-by-Step Craft

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to top