How to Stop Tree Suckers from Growing Back

Tree suckers—vigorous shoots that sprout from the roots or base of a tree—are a common frustration. They weaken the main tree by diverting energy and water, and they can quickly turn a tidy landscape into a thicket. This guide explains how to remove existing suckers and, more importantly, how to prevent them from regrowing. The key is to understand that suckers are often a stress response: a tree that is healthy and happy is far less likely to produce them. Before you start, identify whether your tree is grafted (common for many fruit, ornamental, and maple varieties). If it is, any sucker growth below the graft union will be from the rootstock, not the desired tree, and must be removed entirely.

What You’ll Need

  • Sharp pruning shears or a hand saw (for thicker suckers)
  • A sturdy knife (for cleanly cutting flush with the trunk or root)
  • Gloves to protect your hands
  • Mulch (wood chips or bark)
  • Pruning paint or sealant (optional, for specific cases)
  • Herbicide (only for severe, persistent cases—use with caution)

Step-by-Step

  1. Identify the source. Look at where each sucker emerges. Some will come from the base of the trunk (basal suckers), while others may pop up several feet away from the tree, indicating they are from the root system. Knowing the source helps you decide the best removal method.
  2. Remove suckers when they are young and green. The best time to act is as soon as you see them, ideally when they are still soft and flexible. Young suckers are easier to pull or cut, and removing them early prevents them from hardening into woody stems that are harder to deal with.
  3. For basal suckers, pull them off by hand. If the sucker is young and green, grip it firmly near the base and give it a sharp sideways tug. This often removes the sucker along with the dormant bud from which it grew, which is far more effective than cutting, because cutting can leave the bud intact and trigger regrowth.
  4. For older or woody suckers, cut them flush. If a sucker is too tough to pull, use sharp pruning shears or a saw to cut it as close to the trunk or root as possible. Make a clean cut that is flush with the parent tissue—do not leave a stub. Leaving a stub encourages the bud to resprout.
  5. For root suckers, expose the root first. When a sucker emerges from the soil away from the trunk, dig down a few inches to find the root it is attached to. Cut the sucker off flush with the root using a sharp knife. Then replace the soil. Cutting at the soil line without exposing the root often leaves the bud beneath the surface, which will regrow quickly.
  6. Apply mulch around the base (but not against the trunk). After removing suckers, spread a layer of mulch, a few inches deep, in a wide circle around the tree. Mulch helps regulate soil temperature and moisture, reducing stress that triggers sucker growth. Keep the mulch a few inches away from the trunk itself to prevent rot.
  7. Address the underlying stress. Suckers are often a symptom of a problem. Check the tree for signs of drought, poor soil, root damage from construction, or disease. Water deeply during dry spells, improve soil drainage if needed, and avoid wounding the trunk with lawn mowers or string trimmers. A healthy tree produces fewer suckers.
  8. For persistent, severe cases, consider a targeted herbicide. If you have a tree that constantly produces a thicket of suckers despite good care, you can carefully apply a herbicide to the cut surface of a freshly cut sucker. This must be done immediately after cutting, and only to the sucker, not the main tree. Use a product specifically labeled for cut-stump or cut-surface treatment. This method is most effective on woody suckers in late summer or fall. Always follow the label instructions exactly, and be aware that some herbicides can be taken up by the parent tree, so use this as a last resort.
  9. Monitor and repeat as needed. Sucker prevention is not a one-time fix. Check your tree every few weeks during the growing season and remove any new growth promptly. Consistency is the most important factor—suckers that are removed early and often will eventually stop appearing, as the tree’s energy is redirected to the main canopy.

Common Mistakes

  • Cutting suckers at soil level without exposing the root. This leaves the bud below ground, and it will resprout with renewed vigor.
  • Leaving a stub. Cutting a sucker partway up the stem leaves the dormant buds on the stub, which will quickly produce multiple new shoots.
  • Using pruning paint on every cut. Most trees do not need sealant, and some research suggests it can trap moisture and promote decay. Only use a sealant if you are dealing with a species prone to specific diseases, and only on large cuts, not on small suckers.
  • Applying herbicide carelessly. Spraying suckers with a foliar herbicide can easily drift onto the parent tree or nearby plants, causing damage. The cut-stump method is much safer and more targeted.
  • Ignoring the tree’s health. Removing suckers without addressing the underlying stress (like compacted soil or drought) is a losing battle. The tree will keep sending up new shoots.

Tips

  • Time your removal for the dormant season. While you can remove suckers anytime, doing a thorough cleanup in late winter or early spring, before the tree leafs out, gives you a clear view and reduces the chance of spreading diseases that are active in summer.
  • Use a sharp tool. A dull blade crushes the tissue, making a ragged cut that heals poorly and invites regrowth. Sharpen your shears or knife before each session.
  • Water deeply, not frequently. Shallow watering encourages surface roots, which produce more suckers. Water deeply and less often to encourage deep root growth.
  • Consider the rootstock. If you have a grafted tree and the suckers are clearly from the rootstock, they will never produce the fruit or flowers you want. Removing them is essential, not optional.
  • Keep the base clear. Avoid planting ground cover or grass right up to the trunk. A clear, mulched zone makes it easier to spot and remove suckers early.

Troubleshooting

Suckers keep coming back no matter what you do. This is the most common issue. First, check that you are removing them correctly—are you pulling them off or cutting flush below the soil line? If yes, then focus on the tree’s health. A severely stressed tree (from drought, root damage, or disease) will produce suckers relentlessly. Improve watering, add compost, and consider consulting an arborist to diagnose hidden problems like root rot or girdling roots.

The tree itself is declining. If you notice dieback in the canopy, leaf discoloration, or peeling bark alongside heavy sucker growth, the tree may be in serious trouble. Suckers are sometimes the tree’s last attempt to survive. In this case, do not remove all suckers at once—they may be keeping the tree alive. Instead, have a professional assess the tree’s overall health before you do anything drastic.

Herbicide damaged the parent tree. If you used a cut-stump treatment and the main tree shows signs of wilting or leaf curl, you may have applied too much or the product was taken up by the roots. Unfortunately, there is no antidote. Water the tree well and hope for recovery. This is why the herbicide method should only be used on stubborn cases, and always with a product labeled for that purpose, applied sparingly.

Suckers appear far from the trunk. This indicates an extensive root system. You may need to dig out the sucker and a section of the root it comes from. Cutting the root may be necessary, but be careful—removing large roots can destabilize the tree. If the suckers are numerous and widespread, professional help is recommended.

Frequently Asked Questions

Q: Will pulling suckers off by hand really work better than cutting?
A: Yes, for young, green suckers. Pulling removes the entire bud from which the sucker grows, whereas cutting often leaves the bud intact, leading to regrowth. For woody suckers, cutting flush is the only option.

Q: Is it okay to mow over root suckers?
A: No. Mowing shreds the sucker but leaves the bud below ground, which will resprout. It also creates a rough cut that can invite disease. Always remove suckers by hand or with a sharp tool.

Q: Why does my tree produce more suckers after I prune it?
A: Pruning, especially heavy pruning, is a stress to the tree. In response, it may send up suckers to compensate for lost foliage. This is normal. To minimize this, avoid over-pruning and remove any suckers promptly after you prune.

Q: Can I use rock salt or boiling water to kill suckers?
A: No. These methods can damage the tree’s roots and contaminate the soil, harming nearby plants. They are not effective at killing the sucker’s bud and will likely cause more problems than they solve.

Q: Should I prune the tree’s roots to stop suckers?
A: Cutting roots can reduce suckers, but it also weakens the tree and can make it unstable. It should only be done by a professional arborist, and only for specific, severe cases. It is not a routine fix.

Q: How long will it take for suckers to stop appearing?
A: There is no set timeline. With consistent removal and good tree care, the frequency should decrease over time. Some trees, especially those with vigorous rootstocks, may always produce a few suckers each year. Patience and persistence are key.

How to Stop Tree Suckers from Growing Back

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to top