Narrow & Tall Evergreens: How to Plant and Care

Narrow and tall evergreen trees are a smart choice when you want year-round privacy, a vertical accent, or a natural screen without taking up too much horizontal space. These trees, such as columnar junipers, arborvitae, and certain spruce varieties, grow upright and stay slim, making them ideal for tight side yards, property lines, or framing an entryway. Before you start, choose a tree that matches your climate and soil, and check the mature height and width so it fits your space for years to come.

What You’ll Need

  • A narrow evergreen tree suited to your growing zone
  • Shovel or spade
  • Garden hose or watering can
  • Mulch (wood chips or bark)
  • Compost or balanced slow-release fertilizer (optional)
  • Stakes and soft tree ties (only if the tree is tall or in a windy spot)
  • Gloves and safety glasses

Step-by-Step

  1. Pick the right tree. Confirm the tree’s mature height and width. For a narrow effect, look for columnar, fastigiate, or pyramidal varieties. Check that it is hardy in your region and that the soil drains well.
  2. Choose the planting spot. Measure the distance from buildings, walkways, and power lines. Most narrow evergreens need at least a few feet of clearance from structures so air can circulate and the tree can grow without obstruction.
  3. Prepare the hole. Dig a hole that is about twice as wide as the root ball and just as deep. Loosen the soil at the sides so roots can spread easily. If your soil is heavy clay, mix in some compost to improve drainage.
  4. Remove the tree from its container. Gently slide the tree out of the pot. If the roots are circling the root ball, loosen them with your fingers or make a few shallow vertical cuts with a knife. For burlapped trees, remove the twine and pull the burlap away from the top third of the root ball.
  5. Set the tree in the hole. Place the tree so that the top of the root ball is level with the surrounding ground. Adjust the depth by adding or removing soil beneath the root ball. Do not plant too deep—this is a common cause of decline.
  6. Backfill and water. Fill the hole with the soil you removed, firming it gently as you go. Water thoroughly until the soil settles. If air pockets remain, add more soil and water again.
  7. Mulch. Spread a layer of mulch about 2–3 inches thick around the base, but keep it a few inches away from the trunk to prevent rot. Mulch helps retain moisture and keeps roots cool.
  8. Stake if needed. If the tree is tall or your site is windy, drive two stakes on either side of the root ball and secure the trunk with soft ties. Remove the stakes after the first year or two, once roots establish.
  9. Water regularly. For the first year, water deeply once or twice a week, depending on rainfall. Evergreens lose moisture through their needles in winter, so keep watering until the ground freezes.
  10. Fertilize lightly. In early spring, you can apply a slow-release fertilizer formulated for evergreens, following the package directions. Avoid fertilizing in late summer, which can encourage tender growth that winter will damage.

Common Mistakes

  • Planting too deep. Burying the trunk flare leads to rot and disease. The root ball should sit at or slightly above ground level.
  • Choosing the wrong tree for the space. Some narrow trees still reach several feet wide at maturity. Check the tag and measure your space before buying.
  • Overwatering or underwatering. Both extremes stress the tree. Stick your finger into the soil; if it’s dry an inch down, water.
  • Skipping mulch. Without mulch, soil dries out faster and weeds compete for moisture. But don’t pile mulch against the trunk—that invites pests.
  • Ignoring winter sun and wind. Evergreens can suffer from winter burn, especially on the south and west sides. Consider wrapping young trees in burlap or using an anti-desiccant spray if winters are harsh.

Tips

  • Plant in early spring or fall when temperatures are mild, giving roots time to establish before extreme heat or cold.
  • Group several narrow evergreens together to create a dense screen. Space them according to their mature width—usually a few feet apart—so they grow together without crowding.
  • Prune lightly in late winter or early spring to maintain shape, but avoid cutting into old wood where new growth won’t occur.
  • Water deeply and less frequently to encourage deep root growth. A slow trickle from a hose left at the base for an hour works well.
  • Use a layer of evergreen-specific fertilizer in spring, but follow label instructions—too much can burn roots.

Troubleshooting

  • Browning or yellowing needles. This often signals overwatering, underwatering, or winter burn. Check soil moisture; adjust watering. For winter burn, provide wind protection and water before the ground freezes.
  • Tree leans. If the tree is leaning, it may not have been planted straight or the soil settled. Gently straighten young trees and tamp soil around the base. For larger trees, consult a professional.
  • No new growth. If the tree looks healthy but isn’t growing, the soil may be too compacted or lacking nutrients. Loosen the soil around the root zone and add compost. Ensure it’s getting enough sun.
  • Pests like spider mites or bagworms. Inspect regularly. For spider mites, spray with a strong jet of water. For bagworms, remove the bags by hand in late winter. Avoid broad-spectrum pesticides that harm beneficial insects.
  • Frost cracks. These vertical splits in the bark happen on cold, sunny days. Wrap the trunk in commercial tree wrap in late fall, especially for young trees, and remove it in spring.

Frequently Asked Questions

How fast do narrow evergreens grow? Growth rate varies by species and conditions. Some, like certain arborvitae, can grow a foot or more per year when young; others, like some junipers, are slower. Check the tag for specific growth rates.

Can I plant them close to my house? Yes, but leave at least a few feet of clearance from the foundation to allow air circulation and room for the tree to mature. Also consider how the roots might affect walkways or pipes.

Do they need full sun? Most narrow evergreens prefer full sun (at least six hours of direct sunlight daily). Some tolerate part shade, but they may become leggy and less dense.

How do I keep them narrow? Choose genetically narrow varieties—they naturally stay slim. Pruning to control width is possible, but it can ruin the natural shape. It’s better to pick the right tree from the start.

Can I grow them in containers? Yes, many narrow evergreens do well in large pots, but they need winter protection because roots are less insulated above ground. Use a well-draining potting mix and water regularly.

When should I prune? Light pruning for shape can be done in late winter or early spring. Avoid heavy pruning, as many evergreens won’t regrow from old wood. If you need to reduce height, do it gradually over a few years.

Narrow & Tall Evergreens: How to Plant and Care

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to top