Using a clothes dryer is one of the biggest energy expenses in a home, but you can cut that cost significantly with the right machine and the right habits. This guide walks you through choosing the most energy-efficient dryer for your needs and using it in a way that saves the most electricity and gas. You’ll learn what features matter, how to compare models, and simple everyday changes that reduce drying time and energy use.
What You’ll Need
- Access to product listings or a store to compare dryers (online or in person)
- A tape measure (to check your laundry space and door swing)
- Your current utility bill (to estimate potential savings)
- A clean lint filter (for testing a used dryer)
Step-by-Step
- Choose the right type of dryer. Heat pump dryers are the most energy-efficient option available. They recycle heat and use about half the energy of a conventional vented dryer. If a heat pump model is out of budget, look for a conventional dryer with a high Energy Star rating. Gas dryers are often cheaper to run than electric, but only if you already have a gas hookup.
- Check the Energy Star label. Look for the blue Energy Star logo on the dryer. It means the model meets strict efficiency guidelines set by the U.S. Environmental Protection Agency. Compare the estimated yearly operating cost on the yellow EnergyGuide label—lower is better.
- Look for moisture sensors. A dryer with automatic moisture sensing stops when clothes are dry, rather than running on a fixed timer. This alone can save a significant amount of energy. Avoid dryers that only have timed drying.
- Consider the size. A dryer that’s too small for your household will run more loads, wasting energy. A larger capacity dryer lets you dry bigger loads in one go, but only if you actually fill it. Buy a size that matches your typical laundry volume.
- Check the venting setup. For vented dryers, a short, straight, and smooth vent duct is best. Long or kinked venting makes the dryer work harder and use more energy. If you’re installing a new dryer, place it as close to an exterior wall as possible.
- Use the eco or energy-saver cycle. Most modern dryers have a cycle that uses lower heat and longer tumbling to dry clothes gently with less energy. Use this for everyday loads that aren’t heavily soiled.
- Dry full loads, but don’t overload. A full load is more efficient than several small ones, but cramming too many clothes blocks airflow and extends drying time. Aim for a load that fills about three-quarters of the drum.
- Clean the lint filter before every load. A clogged lint filter restricts airflow, making the dryer run longer and use more energy. Pull the filter out, remove the lint by hand, and rinse it occasionally to remove fabric softener residue.
- Use the highest spin speed on your washer. The faster your washing machine spins out water, the less moisture the dryer has to remove. Use the highest spin setting that’s safe for your fabrics.
- Dry consecutive loads. The dryer stays warm from the previous load, so drying two or three loads back-to-back uses less energy than spreading them out over the day.
Common Mistakes
- Buying a dryer without moisture sensors. Timed drying is a major energy waste because the dryer runs even after clothes are dry.
- Ignoring the vent. A clogged or crushed vent is a fire hazard and makes your dryer work much harder. Check the vent hose and outdoor flap regularly.
- Overloading the dryer. Too many clothes means longer drying time and more energy. Leave room for air to circulate.
- Using high heat for everything. High heat is rarely necessary and uses more energy. Use medium or low heat for most loads.
- Skipping the spin cycle. If your washer has a high-spin option, use it. The dryer will finish much faster.
Tips
- Air-dry the easy stuff. Hang up items like delicates, swimsuits, and workout clothes. You’ll save energy and extend the life of those garments.
- Use dryer balls. Wool dryer balls help separate clothes, allowing hot air to circulate better, which can cut drying time by a little.
- Dry similar fabrics together. Lightweight items dry faster than heavy towels. Separate them so you don’t over-dry the light ones.
- Check the outdoor vent flap. Make sure it opens freely. A stuck flap traps moist air and slows drying.
- Consider a drying rack or clothesline. For sunny days, line-drying is the most energy-efficient option of all. Even using a rack indoors a few times a month helps.
Troubleshooting
- Clothes still damp after a cycle. Check the lint filter and vent for blockages. Make sure you didn’t overload the dryer. If the dryer has a moisture sensor, it may be coated with fabric softener residue—clean it with a damp cloth.
- Dryer takes too long to dry. This is often a venting issue. Disconnect the vent hose and check for lint buildup or kinks. Also, ensure the outdoor flap opens fully.
- Dryer gets very hot. A hot dryer can indicate restricted airflow. Turn it off immediately and inspect the vent. If the vent is clear, the heating element or thermostat may be faulty—call a professional.
- Energy bill still high. Compare your dryer’s energy use with your other appliances. If you dry many loads, consider air-drying more. Also, check that the dryer’s door seal is tight.
- Moisture sensor isn’t working. If clothes come out over-dried or still wet, the sensor may be dirty. Wipe it with a soft cloth and a little rubbing alcohol. If that doesn’t help, the sensor may need replacement.
Frequently Asked Questions
Q: Are heat pump dryers worth the higher upfront cost?
A: Yes, for most households. They use about half the energy of a conventional dryer, so the savings on your utility bill can offset the higher price over the machine’s lifetime. They also don’t need a vent, which gives you more placement options.
Q: Do gas dryers cost less to run than electric?
A: Usually, yes—natural gas is often cheaper than electricity per unit of heat. However, the exact savings depend on your local utility rates. Also, gas dryers require a gas line, which may add installation costs.
Q: Can I use a dryer without a vent?
A: Only if it’s a ventless model, like a heat pump or condenser dryer. These dryers collect moisture in a tank or drain it away. They’re more energy-efficient but take longer to dry.
Q: How often should I clean the dryer vent?
A: At least once a year, but more often if you dry heavy loads or notice longer drying times. A clogged vent is a fire hazard and wastes energy.
Q: Does drying on low heat save energy?
A: Yes, because low heat uses less electricity or gas. However, it may take longer, so the total energy used could be similar. The best approach is to use the moisture sensor and let the dryer stop when clothes are dry.
Q: Is it better to dry clothes outside?
A: Absolutely. Line-drying uses zero energy and is gentler on fabrics. It’s the most energy-efficient choice, though it depends on weather and space.