Deciding whether to install a fence or do the landscaping first is a common dilemma for homeowners. The short answer is: install the fence first in most cases. This order prevents damage to new plants, allows heavy equipment to work without crushing beds, and makes the fence line the clear boundary for your design. However, there are exceptions, and the best choice depends on your specific project. This guide walks you through the decision, the steps for each order, and how to avoid costly mistakes.
What You’ll Need
- Fence materials (posts, rails, panels, or pickets) and concrete for setting posts (if applicable)
- Landscaping materials: plants, mulch, edging, soil, and any hardscape like pavers or gravel
- Basic tools: shovel, post hole digger, level, tape measure, string line, and a wheelbarrow
- Protective gear: work gloves and safety glasses
- Utility locator service (call before you dig to mark underground lines)
- Permits if required by your local municipality
Step-by-Step
If you choose fence first (recommended for most projects):
- Mark your property lines. Obtain a survey or locate the boundary markers. This ensures the fence is placed legally and avoids disputes with neighbors.
- Call for utility locates. Before any digging, have all underground utilities marked. This is a critical safety step.
- Install the fence. Set posts, attach rails and pickets, and finish the fence completely. This includes any gates and hardware.
- Clean up the fence area. Remove any construction debris, excess dirt, and concrete spills immediately. It’s much easier to clean bare ground than to clean around new plants.
- Plan your landscape layout. With the fence in place, you can now measure the exact space and design your planting beds, paths, and other features.
- Prepare the soil. Till or amend the soil in your planting areas, and install any edging or hardscape (like a patio or walkway) before planting.
- Plant your landscaping. Place plants according to your design, then mulch and water thoroughly.
If you choose landscaping first (only in specific situations):
- Assess why you’re doing this. This order works if you’re installing a simple, non-invasive fence (like a low decorative border) or if your landscape is already established and you’re only adding a fence along an existing path.
- Complete all heavy landscaping first. Do any grading, install large trees or shrubs, and build any retaining walls or patios. This is because these tasks involve heavy equipment that could damage a new fence.
- Protect your plants. If you must install the fence after landscaping, cover or temporarily move delicate plants near the fence line to avoid damage from tools and foot traffic.
- Install the fence carefully. Use hand tools where possible, and be mindful of root systems. Post holes may need to be dug by hand to avoid cutting major roots.
Common Mistakes
- Not checking property lines. Installing a fence on a neighbor’s property can lead to legal issues and the cost of moving the fence.
- Planting before the fence. This often results in crushed plants and wasted money, as workers and equipment will trample the area.
- Forgetting about maintenance access. If you plant shrubs right against the fence, you won’t be able to reach the fence for painting, staining, or repairs. Leave a gap of at least a couple of feet.
- Ignoring underground utilities. Hitting a gas or electric line can be dangerous and expensive. Always call for locates first.
- Not considering the fence’s shadow. A solid fence creates a shaded area that may not suit sun-loving plants. Plan your plant choices accordingly.
Tips
- Think about the fence’s purpose. If the fence is for privacy or security, it should go first so that landscaping doesn’t obstruct the installation. If it’s purely decorative, the order matters less.
- Use the fence as a backdrop. Planting after the fence lets you position plants to hide the bottom of the fence or to create a beautiful layered look against it.
- Coordinate with neighbors. If the fence is on a shared boundary, discuss the plan with your neighbor to avoid disputes later.
- Choose low-maintenance plants near the fence. This reduces the need to work close to the fence, which can damage it over time.
- Consider the fence’s style. A chain-link fence might be installed differently than a wooden privacy fence. Adjust your plan accordingly.
Troubleshooting
What if the fence is already installed but you need to plant near it?
This is common. Simply dig planting holes away from the fence posts to avoid damaging the concrete footings. If you need to plant right against the fence, choose shallow-rooted plants and water them carefully to avoid washing out the soil around the posts.
What if you’ve already landscaped and now need a fence?
This is trickier. Protect your plants with burlap or cardboard during installation. If possible, use a smaller post hole digger to minimize soil disturbance. You may need to prune or temporarily move plants that are in the way.
What if the fence is leaning after installation?
This is usually due to improper post setting. If the concrete hasn’t cured, you can brace the post and straighten it. If it’s already cured, you may need to dig out the post and reset it. This is why it’s crucial to set posts deep enough (about one-third of the post length) and use concrete in most soil types.
What if plants are dying along the fence line?
This could be due to lack of sunlight, poor soil, or competition from the fence’s concrete footings. Check the sun exposure and soil moisture. You may need to choose different plants or amend the soil.
Frequently Asked Questions
Q: Can I install a fence after I’ve already done my landscaping?
A: Yes, but it’s riskier. You’ll need to protect your plants and be prepared for some damage. It’s often better to wait until the fence is up before planting new beds.
Q: What if I’m installing a fence and a patio at the same time?
A: Install the fence first, then the patio. The fence provides a clear boundary, and the patio can be built right up to it. This avoids damaging the patio with fence installation equipment.
Q: How much space should I leave between the fence and plants?
A: At least a couple of feet is ideal for maintenance access. For large shrubs or trees, leave more space so they don’t push against the fence as they grow.
Q: Do I need a permit to build a fence?
A: Many municipalities require a permit, especially for fences over a certain height. Check with your local building department before you start.
Q: Should I install the fence myself or hire a professional?
A: It depends on your skills and the fence’s complexity. A simple fence can be a DIY project, but for large or sloped yards, a professional may save you time and ensure a sturdier result.
Q: What is the best time of year to install a fence and landscaping?
A: Spring and fall are generally best for planting, as temperatures are moderate. Fences can be installed year-round, but frozen ground in winter can make post digging difficult.