How to Winterize an Outdoor Faucet

When freezing temperatures arrive, an outdoor faucet (also called a spigot or hose bib) can become a major source of costly damage. Water left inside the pipe expands as it freezes, which can crack the pipe, the faucet, or even the supply line inside your home. Winterizing your outdoor faucet prevents this by removing water and insulating the fixture. This guide walks you through the process, whether you have a simple faucet or a frost-free model. Before you begin, make sure you have the necessary supplies and that the outdoor temperature is above freezing so you can work comfortably.

What You’ll Need

  • Adjustable wrench or pliers
  • Bucket or large bowl
  • Insulated faucet cover (or towels, plastic bag, and tape)
  • Pipe insulation foam (for exposed pipes)
  • Heat tape (optional, for extra cold climates)
  • Screwdriver (if your faucet has a set screw)
  • Rags or towels

Step-by-Step

  1. Turn off the water supply. Locate the shut-off valve for your outdoor faucet, usually found in your basement, crawl space, or utility room. Turn it clockwise until it is fully closed. If you cannot find a dedicated valve, turn off the main water supply to your house.
  2. Open the outdoor faucet. Go outside and turn the faucet handle counterclockwise to open it fully. This allows any remaining water to drain out.
  3. Disconnect any hoses. Remove any garden hoses, splitters, or attachments from the faucet. Store them indoors if possible. Hoses left attached can freeze and crack, and they trap water in the faucet.
  4. Drain the water. Place a bucket under the faucet to catch any water that drips out. Wait until the flow stops completely. If water continues to drip for a long time, you may have a leak or a low point in the pipe—see Troubleshooting.
  5. Open the drain valve (if present). Some homes have a small drain cap or valve on the shut-off valve or near the faucet. Open it to let out any trapped water. Close it again once water stops flowing.
  6. Leave the faucet open. After draining, leave the outdoor faucet handle in the open position. This prevents any residual water from being trapped and allows air to circulate. (If you have a frost-free faucet, check the manufacturer’s instructions—some recommend closing it after draining.)
  7. Insulate the faucet. Place an insulated faucet cover over the exterior faucet. These are foam covers that fit over the spigot and secure with a drawstring or Velcro. If you don’t have a cover, wrap the faucet with old towels, then cover with a plastic bag and secure with tape. Make sure the cover is snug but not too tight.
  8. Insulate exposed pipes. If any pipes leading to the faucet are exposed (in an unheated area), wrap them with foam pipe insulation. For extreme cold, you can also use heat tape, following the manufacturer’s instructions carefully to avoid fire risk.
  9. Double-check the shut-off valve. Return inside and ensure the shut-off valve is fully closed. If you have a drain valve, make sure it is closed as well.
  10. Label the faucet. Tie a tag or piece of string to the faucet handle reminding you to close it in spring before turning the water back on.

Common Mistakes

  • Leaving hoses attached. This is the most common mistake. A hose traps water in the faucet, and freezing can crack both the hose and the faucet.
  • Forgetting to drain the water. Simply turning off the water isn’t enough. You must open the faucet and let all water run out.
  • Closing the faucet after draining. If you close the faucet, any remaining water can’t escape and may freeze. Leave it open (unless you have a frost-free model with specific instructions).
  • Not insulating the faucet. Even if you drain it, insulation adds a layer of protection against residual moisture and freezing winds.
  • Using a cheap cover. A thin cover may not provide enough insulation in very cold climates. Invest in a cover rated for your area’s temperatures.
  • Forgetting the inside valve. If you don’t shut off the water inside, the pipe can still freeze and burst.

Tips

  • Do this before the first hard freeze, ideally in late autumn.
  • If you live in a very cold region, consider installing a frost-free faucet (also called a freeze-proof hose bib) which has a long stem that shuts off water inside the warm part of the house.
  • Use a faucet cover with a built-in foam insert that fits over the spigot. Make sure it covers the entire metal part.
  • For extra protection, you can wrap the faucet cover with a plastic bag and tape to keep it dry.
  • If you have a manifold system (multiple shut-off valves), label each one so you know which controls which outdoor faucet.
  • In spring, before using the faucet, close the faucet handle, then slowly open the shut-off valve inside. Check for leaks.

Troubleshooting

  • Water keeps dripping after you think you’ve drained it. This could mean the shut-off valve is not fully closed, or there is a low spot in the pipe that holds water. Try closing the valve more firmly. If it still drips, you may need to replace the valve washer or call a plumber.
  • The faucet is frozen. If you turn on the faucet and no water comes out, the pipe may be frozen. Do not use a torch or open flame. Use a hair dryer (on low, moving it around) or a heat lamp to gradually thaw the pipe. If you can’t thaw it, call a plumber.
  • You see a crack in the faucet or pipe. This indicates freezing has already occurred. Turn off the water supply immediately and call a plumber. Do not use the faucet until it’s repaired.
  • The faucet cover keeps falling off. Use a larger cover or secure it with zip ties or duct tape. Make sure the area is dry before attaching.
  • You can’t find the shut-off valve. Look for a valve on the wall where the pipe enters the house, or near the water meter. If you have a slab foundation, the valve might be in a utility closet. If you truly can’t find it, you may need to shut off the main water supply for the winter, which is a bigger job—consider calling a professional.

Frequently Asked Questions

Q: Do I need to winterize a frost-free faucet?
Yes, but it’s easier. Frost-free faucets are designed to drain themselves when you turn them off, but you should still disconnect hoses and cover the exterior. Also, make sure the faucet is installed with a slight slope so water drains out.

Q: Can I use a rubber hose to drain the faucet?
No. A hose left attached will trap water and freeze. Always disconnect hoses.

Q: How often should I winterize?
Once a year, before the first freeze. If you live in a climate with multiple freeze-thaw cycles, check your faucets before each cold snap.

Q: What if I forget to winterize and it freezes?
If the faucet is frozen, don’t use it. Turn off the water supply. If you notice a crack, call a plumber. If it thaws without damage, you may be lucky, but inspect for leaks.

Q: Can I use a faucet cover on a frost-free faucet?
Yes, it’s recommended. The cover helps protect the vacuum breaker and adds insulation.

Q: Should I leave the faucet open or closed after winterizing?
For a standard faucet, leave it open. For a frost-free faucet, follow the manufacturer’s instructions—usually open, but some recommend closing after draining.

How to Winterize an Outdoor Faucet

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to top