Moving a dresser on your own can save you money and give you control over the process, but it requires careful planning and proper technique to avoid injury and damage. This guide walks you through the entire process, from preparation to final placement, ensuring a smooth move even if you’re working solo.
What You’ll Need
- Furniture dolly or hand truck (rated for the dresser’s weight)
- Furniture straps or a moving belt (optional but highly recommended)
- Moving blankets or thick quilts
- Plastic wrap or stretch wrap
- Packing tape
- Scissors or a box cutter
- Screwdriver (Phillips and flathead) or Allen wrench set
- Small plastic bags for hardware
- Marker and labels
- Furniture sliders (for hardwood or tile floors)
- Door wedges or a pry bar (to lift the dresser slightly)
- Work gloves with good grip
- Non-slip mat or cardboard for the dolly
Step-by-Step
- Clear the path. Measure the dresser’s height, width, and depth, and measure all doorways, hallways, and stairwells along the route. Remove any obstacles like rugs, plants, or furniture. If the dresser is too wide for a doorway, you’ll need to disassemble it or remove the doors.
- Empty the dresser completely. Remove all clothing, linens, and items from the drawers. Check every drawer and shelf, including the top. Leaving items inside adds significant weight and can cause drawers to slide out during the move, leading to injury or damage.
- Remove the drawers. Take out each drawer and set it aside. If the drawers are heavy (e.g., solid wood), remove them one at a time and place them on a blanket. Label each drawer with its position (e.g., “top left”) using tape and a marker. This makes reassembly much easier.
- Secure loose parts. If the dresser has a mirror, detach it if possible and wrap it in a blanket. For attached mirrors, tape the glass with painter’s tape in an X pattern to prevent shattering. Also, check for any loose knobs, handles, or decorative trim and remove or tighten them.
- Disassemble if necessary. Some dressers have legs or a base that can be unscrewed. Use the appropriate screwdriver or Allen wrench to remove them. Keep all hardware in a labeled plastic bag and tape it to the dresser frame so it doesn’t get lost.
- Wrap the dresser frame. Cover the entire frame with moving blankets. Secure the blankets with packing tape or plastic wrap. Pay extra attention to corners and edges, which are prone to damage. For extra protection, wrap the dresser in plastic wrap over the blankets to keep them in place and add a moisture barrier.
- Prepare the dolly. Place a non-slip mat or a piece of cardboard on the dolly’s platform to prevent the dresser from sliding. If you’re moving on carpet, you may skip this step, but for hard floors, it’s essential.
- Tilt and load the dresser. With the dresser empty and wrapped, tilt it slightly onto one side. Slide the dolly underneath, positioning the platform so it supports the center of the dresser. If the dresser is tall, you may need to lay it flat on the dolly’s platform rather than standing it upright. Secure the dresser to the dolly using furniture straps or bungee cords, making sure it’s snug but not so tight that it damages the wood.
- Move slowly and carefully. Push the dolly, don’t pull it, and keep your back straight. Use your legs to push, and go slowly, especially around corners. If you need to go up or down stairs, have a helper or use a stair-climbing dolly if available. If you’re alone, take breaks and never rush.
- Navigate doorways and hallways. When going through a doorway, approach it straight on, not at an angle. If the dresser is too wide, you may need to angle it slightly, but be cautious of scratching the walls. Use door wedges to prop doors open so they don’t swing shut and hit the dresser.
- Place the dresser in the new room. Once you reach the destination, carefully remove the straps and slide the dresser off the dolly. Place furniture sliders under the dresser’s feet if you need to move it across a hard floor. Position it against the wall, making sure it’s level.
- Reassemble and reload. Put the drawers back in their correct slots, reattach any legs or mirrors, and tighten all hardware. Then, fill the drawers with your belongings.
Common Mistakes
- Leaving items in drawers. This is the most common mistake. It makes the dresser heavier and unbalanced, increasing the risk of back injury and damage to the dresser.
- Not measuring doorways. You might get the dresser to the new room only to find it won’t fit through the door. Always measure first.
- Lifting with your back. Bending at the waist and lifting with your back can cause serious injury. Always lift with your legs and keep your back straight.
- Forgetting to secure the drawers. Even if you remove most drawers, leaving a few in place can cause them to slide out during the move, potentially hitting you or falling and breaking.
- Not using a dolly. Trying to carry a large dresser by hand is exhausting and dangerous. A dolly is essential for moving heavy furniture safely.
- Skipping the wrap. Without blankets, the dresser will get scratched, dented, or gouged, especially on corners and edges.
Tips
- Use furniture sliders on hard floors. If you’re moving the dresser within the same room or across a hallway, sliders make it easy to glide the dresser without lifting.
- Protect your floors. Lay down cardboard or a drop cloth along the path to protect hardwood or tile from scratches. On carpet, use a plastic mat to avoid crushing the fibers.
- Take the drawers out of the dresser and move them separately. This reduces the weight and makes the frame easier to handle. You can stack the drawers on the dolly if they’re stable.
- Use a furniture strap or moving belt. This helps distribute the weight and gives you better control when lifting or carrying the dresser.
- Ask for help if you can. Even one extra person can make a huge difference, especially when navigating stairs or tight corners. If you’re alone, take frequent breaks and don’t overexert yourself.
- Label everything. Label the drawers and any hardware bags. This will save you time and frustration when reassembling.
Troubleshooting
- The dresser won’t fit through the door. First, check if the dresser can be disassembled further. Remove the drawers, legs, and any trim. If it still doesn’t fit, you may need to remove the door from its hinges. If that doesn’t work, consider hiring professionals who have specialized equipment.
- The dresser is too heavy to lift onto the dolly. Use a pry bar or a furniture strap to lift one side at a time. Place a block of wood under the edge to keep it elevated while you position the dolly. Alternatively, you can slide the dresser onto the dolly using a ramp or a piece of cardboard.
- The dresser scratches the wall. Use a blanket or a piece of cardboard to protect the wall as you maneuver. Go slowly and check the clearance on both sides.
- A drawer gets stuck during reassembly. Check the slides and tracks for debris or misalignment. Clean them with a dry cloth and ensure the drawer is oriented correctly. If the drawer still sticks, the dresser may be uneven; adjust the feet or use shims.
- The dresser tips over on the dolly. This can happen if the dresser is top-heavy or not properly secured. Always strap the dresser to the dolly and keep the center of gravity low. If the dresser is tall, lay it flat on the dolly instead of standing it upright.
Frequently Asked Questions
Q: Can I move a dresser by myself without a dolly?
A: Yes, but it’s not recommended for large or heavy dressers. If you must, empty the dresser completely, remove the drawers, and use furniture sliders to slide it across the floor. For stairs, you’ll need at least one helper.
Q: How do I move a dresser up stairs alone?
A: It’s extremely difficult and risky to move a large dresser up stairs alone. If you have no choice, use a stair-climbing dolly or a hand truck with stair glides. Go one step at a time, and always keep the dresser tilted toward you to maintain balance. Consider hiring a professional for staircases.
Q: Should I remove the drawers when moving a dresser?
A: Yes, always remove the drawers. This reduces the weight and prevents them from sliding out and causing injury. It also makes the frame lighter and easier to maneuver.
Q: How do I protect a dresser with a glass mirror?
A: If the mirror is detachable, remove it and wrap it in a blanket or bubble wrap. If it’s attached, tape the glass with painter’s tape in an X pattern to prevent shattering, then wrap the entire dresser in a blanket.
Q: What’s the best way to lift a dresser to avoid back injury?
A: Use your legs, not your back. Keep your back straight, bend at the knees, and hold the dresser close to your body. Avoid twisting; pivot with your feet instead. If the dresser is heavy, use a lifting strap or get help.
Q: Can I use a regular hand truck instead of a furniture dolly?
A: Yes, a hand truck can work, but a furniture dolly with a flat platform is better for stability. If you use a hand truck, make sure the dresser is securely strapped and that the weight is balanced. For tall dressers, a hand truck may be easier to maneuver in tight spaces.