How to Make Spring-Loaded Snakes

Spring-loaded snakes are a classic novelty toy that jumps out of a can or box when opened. Making your own is a fun craft project that combines simple mechanics with a bit of surprise. This guide will show you how to build a working spring-loaded snake using common household materials. You’ll need a few basic supplies and a little patience, but the result is a delightful toy that pops up when you lift the lid.

What You’ll Need

  • A small cylindrical container with a lid (like a potato chip canister, a tennis ball tube, or a cardboard mailing tube)
  • A long, thin spring (from an old retractable pen, a broken toy, or a craft store)
  • Construction paper or thin cardstock in green (or any color you like)
  • Scissors
  • Tape (clear or masking)
  • Glue stick or craft glue
  • Markers or googly eyes for decorating
  • A small piece of cardboard (for the base)

Step-by-Step

  1. Prepare the container: Clean your container thoroughly and remove any labels. Make sure the lid fits snugly but can be easily popped off.
  2. Create the snake body: Cut a strip of construction paper about 1 inch wide and long enough to wrap around the spring. The length will depend on your spring; you want the paper to cover the spring completely when it’s compressed. You can cut multiple strips and tape them together to get the right length.
  3. Attach the paper to the spring: Apply glue along one edge of the paper strip and press it onto the spring coil, starting at one end. Carefully wrap the paper around the spring, overlapping slightly, until the entire spring is covered. Let the glue dry.
  4. Make the snake head: Cut a shape for the snake’s head from cardstock or a thicker piece of paper. A simple oval or teardrop shape works well. Add eyes and a forked tongue using markers or cut out small pieces of paper.
  5. Attach the head: Glue or tape the head to the top end of the spring (the end that will pop up). Make sure it’s secure.
  6. Create a base: Cut a circle of cardboard that fits snugly inside the bottom of your container. This will be the platform that the spring sits on.
  7. Attach the spring to the base: Glue or tape the bottom end of the spring to the center of the cardboard circle. Allow it to dry completely.
  8. Insert into the container: Place the cardboard base with the spring into the bottom of the container. The spring should be compressed when you put the lid on. If it’s too long, you may need to trim the spring or use a shorter one.
  9. Test and adjust: Put the lid on and press down. The spring should compress. When you remove the lid, the snake should pop up. If it doesn’t pop high enough, you may need a stronger spring or a slightly taller container.
  10. Decorate the container: You can wrap the outside of the container with paper or decorate it with markers to make it look like a can of snakes.

Common Mistakes

  • Spring too weak: A spring that is too weak won’t push the snake up enough. Test your spring before assembling.
  • Paper too tight: If you wrap the paper too tightly around the spring, it may restrict the spring’s ability to expand. Leave a little slack.
  • Lid too loose: If the lid doesn’t fit snugly, the snake might pop out on its own. Make sure the lid fits securely.
  • Base not secured: If the cardboard base isn’t glued well, it can come loose and the snake won’t spring properly.

Tips

  • Use a spring from a retractable pen – they are usually the right size and strength for small containers.
  • If you don’t have a spring, you can use a strip of flexible plastic or a piece of rubber band, but the effect will be less springy.
  • Make the snake as long as the container is tall, so it fully extends when opened.
  • Add a small weight to the base (like a few coins) to keep the container stable when the snake pops.
  • For a more realistic snake, add a pattern with markers or paint.

Troubleshooting

  • The snake doesn’t pop up: Check that the spring is not stuck. Make sure the paper isn’t blocking the spring’s movement. Try stretching the spring slightly to give it more tension.
  • The snake pops out too violently: If the snake flies out of the container, the spring is too strong. You can shorten the spring or use a weaker one.
  • The snake is crooked: If the snake leans to one side, the spring may not be attached straight. Re-glue the base or head to align it properly.
  • The lid won’t stay on: If the spring pushes the lid off, you need a stronger lid or a weaker spring. You can also add a small latch or rubber band to hold the lid down.

Frequently Asked Questions

  • Can I use a different type of spring? Yes, any coil spring that fits inside your container will work. You can also use a piece of flexible wire bent into a coil, but it won’t be as springy.
  • What if I don’t have a cylindrical container? You can use a small box with a hinged lid, but you’ll need to attach the spring to the inside of the lid instead of the base.
  • How do I make the snake look more realistic? Use green paper with a pattern, add a forked tongue, and draw scales or spots. You can also use felt for a softer texture.
  • Is this safe for young children? This project involves small parts and scissors, so adult supervision is recommended. The spring can be a hazard if it’s sharp, so make sure it’s covered completely with paper.
  • Can I make the snake pop out of a different object? Yes, you can adapt this design to fit any container with a lid, like a small gift box or a plastic egg.
  • Why does my snake get stuck halfway? This usually happens if the spring is too long for the container or if the paper is too thick. Trim the spring or use thinner paper.
How to Make Spring-Loaded Snakes

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to top