Covering a storm drain in your backyard is a practical safety and maintenance project. It prevents leaves, trash, and curious pets or children from falling into the drain, while still allowing water to flow through. Before you start, check with your local municipality—some drains are part of the public stormwater system and must not be altered. If it’s a private drain on your property, you can proceed. This guide covers choosing the right cover, measuring, installing, and common pitfalls.
What You’ll Need
- Measuring tape
- Safety gloves (cut-resistant)
- Safety glasses
- Drain cover or grate (choose a style that fits your drain type—metal, plastic, or composite)
- Fasteners (screws, bolts, or anchors, depending on the cover and surface)
- Drill with appropriate bits (if fastening to concrete or wood)
- Shovel (if you need to clear debris around the drain)
- Level (to ensure the cover sits flat)
- Work gloves for heavy lifting
Step-by-Step
- Identify the drain type. Look at the drain opening. Is it a round grate, a rectangular trench, or a curb inlet? This determines the cover style. Common types include flat grates that sit on top, recessed covers that fit into a frame, and pop-up covers for pipes.
- Check with local authorities. Before buying or installing anything, call your local public works or stormwater department. If the drain is part of the public system, they may have specific requirements or may even provide a cover. If it’s private, you’re free to proceed.
- Measure the drain opening. Use a measuring tape to get the length and width of the opening, and the depth of the rim or frame. Also measure the outer dimensions if the cover needs to overhang. Write these numbers down. For round drains, measure the diameter.
- Choose the right cover. Select a cover that matches your measurements. Consider the load it will bear—if you drive over it, you need a heavy-duty metal grate; for pedestrian areas, a lighter plastic or composite cover works. Ensure the cover has openings small enough to prevent small children or pets from getting through (generally less than a couple of inches).
- Clear the area. Remove any debris, leaves, or dirt from around the drain and the rim. Use a shovel if needed. This ensures a clean surface for installation and prevents the cover from sitting unevenly.
- Test-fit the cover. Place the cover over the drain without fastening it. Check that it sits flush and covers the entire opening. If it rocks or doesn’t fit, adjust or choose a different size.
- Secure the cover. Depending on the cover and surface, you’ll either screw it into the drain frame or into the surrounding concrete or wood. For concrete, use masonry anchors or concrete screws. For metal frames, use metal screws. If the cover is heavy and sits snugly, it may not need fasteners, but for safety, especially with children, secure it.
- Check stability. After fastening, step on the cover and wiggle it. It should not move. If it does, tighten the fasteners or add additional ones.
- Test water flow. Pour a bucket of water over the cover. It should drain quickly without pooling. If water backs up, the cover openings may be too small or blocked—clean or adjust.
Common Mistakes
- Installing without checking local rules. You might face fines or be forced to remove the cover if it’s a public drain.
- Choosing the wrong size. A cover that’s too small leaves gaps; one that’s too large may not fit the frame and could be a trip hazard.
- Using a cover with openings too large. This defeats the purpose of safety, as small children or pets could still slip through.
- Not securing the cover. A loose cover can shift, creating a hazard or allowing debris to enter.
- Blocking water flow. Some covers are solid or have tiny holes; they can cause flooding during heavy rain.
Tips
- For child safety, choose a cover with a locking mechanism if available.
- Consider a cover with a hinge if you need regular access to the drain for cleaning.
- Use stainless steel or galvanized metal for durability in wet conditions.
- If the drain collects a lot of leaves, consider a dome-shaped cover that allows water in from the sides while keeping debris out.
- Take a photo of the drain before covering, in case you need to reference it later.
Troubleshooting
- Cover doesn’t fit. Re-measure the drain opening. If the cover is too large, you may need to trim it (if it’s plastic) or exchange it. If too small, you’ll need a larger size or an adapter.
- Water pools on the cover. This means the openings are too small or clogged. Clean the cover, or drill additional small holes if the material allows. If it’s a solid cover, replace it with a perforated one.
- Cover is loose after installation. Tighten the screws or add more. If the concrete is crumbling, use a different anchor type or consult a professional.
- You can’t find a cover for an odd-sized drain. Consider a custom-cut piece of metal grate or a cover from a specialty supplier. You can also build a frame from pressure-treated wood, but ensure it’s properly sealed.
- Debris still gets in. If the cover has gaps around the edges, use a weatherproof sealant to fill them, or add a gasket.
Frequently Asked Questions
- Do I need permission to cover a storm drain in my yard? If the drain is part of the public stormwater system, yes—you must get approval from your local municipality. If it’s a private drain on your property, you generally don’t need permission, but it’s still wise to check local codes.
- What type of cover is best for a driveway drain? For driveways, use a heavy-duty metal grate that can support vehicle weight. Cast iron or steel are common choices. Ensure it’s rated for the load.
- Can I just put a piece of plywood over the drain? It’s not recommended. Plywood can rot, warp, and may not support weight. It also blocks water flow. Use a proper drain cover designed for the purpose.
- How do I clean a covered drain? Remove the cover (if it’s removable) and clean out any debris from the drain. If the cover is fixed, use a hose or a plumber’s snake to clear the drain from above.
- Will a cover prevent flooding? A cover won’t prevent flooding if the drain is overwhelmed, but it will keep large debris out, which helps maintain water flow. Ensure the cover has adequate open area for water to enter.
- What if my drain is a grate that’s flush with the ground? You can install a recessed cover that fits into the existing frame, or you may need to replace the entire grate with a new one that has a cover. Measure the frame carefully.
How to Cover a Storm Drain in Your Backyard