Garden Bench to Planter Conversion Guide

Turning an old garden bench into a planter is a clever way to give a tired piece of furniture a second life. Instead of hauling it to the curb, you can transform the seat area into a long, raised bed for herbs, flowers, or trailing greenery. This project takes a couple of hours, uses basic tools, and works with almost any wooden bench. You will need to add a liner and drainage holes so the soil stays put and water can escape, keeping the wood from rotting too quickly.

What You’ll Need

  • An old wooden garden bench (any size or style)
  • Outdoor wood sealant or waterproofing stain
  • Plastic liner or heavy-duty landscape fabric
  • Staples and a staple gun, or small nails and a hammer
  • A drill with a large bit (about half an inch or larger)
  • Potting soil
  • Plants or seeds of your choice
  • Optional: small gravel or pebbles for drainage
  • Optional: wood screws and corner brackets for extra support

Step-by-Step

  1. Clean and inspect the bench. Brush off dirt, cobwebs, and loose paint. Check all joints and legs for rot or cracks. If a leg is wobbly, tighten the screws or add a corner bracket. If any wood is soft or crumbly, replace that piece or skip the bench—it will not hold soil weight.
  2. Decide on the planter depth. Look at the space between the seat slats and the bench frame. You want the soil to sit at least a few inches deep. If the seat has wide gaps, you will fill them with liner. If the bench has a solid seat, you can build a simple box on top using scrap wood, or just line the seat itself.
  3. Waterproof the wood. Apply a coat of outdoor wood sealant or stain to the entire bench, especially the inside of the seat area and the legs. This protects against moisture from the soil and rain. Let it dry completely according to the product instructions—usually a few hours or overnight.
  4. Drill drainage holes. If the seat is solid wood, drill several holes through the seat boards, spaced a few inches apart. If the seat is slatted, the gaps already provide drainage. For a bench with a solid top, flip it over and drill from underneath so the holes are clean on the planting side.
  5. Add a liner. Cut a piece of plastic liner or heavy landscape fabric to fit the seat area, leaving enough overlap to fold over the edges. Lay it inside the seat, pushing it into the corners. Staple the liner to the inside edges of the bench frame, making sure it is snug but not stretched too tight. The liner holds the soil in and prevents it from washing out through the slats.
  6. Create a drainage layer (optional). Spread a thin layer of small pebbles or gravel over the liner, about an inch deep. This helps water flow to the holes and keeps soil from clogging them. Skip this if your bench already has large gaps.
  7. Fill with potting soil. Add potting soil until it is nearly full, leaving about an inch of space below the rim. Do not use garden soil, as it compacts too much in a container. Moisten the soil lightly before planting.
  8. Plant your choices. Choose plants that suit the sun exposure of where the bench sits. Herbs like basil or thyme do well in full sun; ferns or impatiens prefer shade. If you want trailing plants, place them near the edges so they spill over the sides. Space plants according to their mature size—crowding will stunt them.
  9. Water thoroughly. Give the planter a good soak right after planting. Water until it runs out the drainage holes. Check the soil moisture daily for the first week, as containers dry out faster than the ground.
  10. Maintain regularly. Water when the top inch of soil feels dry. Feed with a balanced liquid fertilizer every few weeks during the growing season. Trim spent flowers and harvest herbs to encourage new growth.

Common Mistakes

  • Skipping the liner. Without a liner, soil will wash out through the slats every time you water, making a mess and starving the roots.
  • Forgetting drainage. If water cannot escape, the roots sit in soggy soil and rot. Always ensure there are gaps or holes at the bottom.
  • Using garden soil. Garden soil is too heavy for a raised container; it compacts and suffocates roots. Use a quality potting mix.
  • Overloading a weak bench. Wet soil is heavy. If the bench is old or wobbly, reinforce the joints or choose a lighter filler like perlite mixed with soil.
  • Not waterproofing. The wood will absorb moisture and rot much faster without a sealant, shortening the life of your planter.

Tips

  • Place the bench in its final spot before filling it with soil—moving a full planter is very heavy and can strain your back or break the bench.
  • If the bench has a backrest, use it as a natural trellis for climbing plants like peas or morning glories.
  • Line the inside with a double layer of landscape fabric for extra durability, especially in hot, sunny climates where plastic degrades faster.
  • Use a liner color that blends with the bench, or fold the edges neatly and staple them hidden underneath the seat rim for a cleaner look.
  • Consider adding a drip tray underneath if the bench sits on a wooden deck or patio, to prevent water stains.

Troubleshooting

  • Water pools on top of the soil. This usually means the drainage holes are blocked or the liner is not allowing water through. Check the holes and clear them with a stick. If the liner is too thick, poke small holes in it with a fork.
  • Soil spills out of the sides. The liner may be too loose or not stapled high enough. Re-staple it, pulling it tighter and folding it over the top edge of the bench frame.
  • Plants are yellowing. This often signals overwatering. Let the soil dry out more between waterings, and make sure the drainage holes are not clogged.
  • The bench wobbles. Tighten all screws and bolts. If the joints are loose, add wood glue and clamp them, or screw in a metal corner brace for stability.
  • Wood starts to rot. If you see soft spots, stop using the planter immediately. Remove the soil, let the wood dry, and apply a stronger wood hardener. If the rot is extensive, replace the affected boards or retire the bench.

Frequently Asked Questions

Can I use any type of bench?
Most wooden benches work well. Avoid benches with metal frames that may rust, and skip benches with severe rot. Plastic or resin benches can also work but need a different liner approach since staples may not hold.

How deep does the planter need to be?
For shallow-rooted plants like lettuce or herbs, a few inches is enough. For deeper roots like tomatoes or shrubs, you need at least a foot of soil. If your bench seat is shallow, build up the sides with scrap wood to add depth.

Will the bench rot over time?
Eventually, yes, but sealing the wood and using a liner will extend its life for several seasons. Check the wood each spring and reapply sealant as needed. The liner also keeps soil from directly touching the wood, which slows decay.

What plants grow best in a bench planter?
Trailing plants like petunias or sweet potato vine look great spilling over the sides. Upright herbs, leafy greens, and compact flowers like marigolds also thrive. Avoid large trees or deep-rooted vegetables unless you have a very deep bench.

Can I keep the planter outside all winter?
In cold climates, the soil will freeze and expand, which can crack the bench or the liner. Empty the soil in late fall, or move the bench to a sheltered spot. You can also leave it but expect more wear on the wood.

How often should I water?
It depends on the weather and plant type. Check the soil daily—if the top inch is dry, water. In hot, windy conditions you may need to water daily; in cooler weather, every few days is often enough.

Garden Bench to Planter Conversion Guide

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to top