This DIY cactus ring toss game is a fun, whimsical project that adds a desert-chic touch to your patio, backyard, or game room. It’s a great weekend craft for adults and older kids, and it makes a unique gift. You’ll build a sturdy cactus-shaped target from cardboard or wood, then toss rings to score points. No special skills are needed—just some patience and basic crafting supplies.
What You’ll Need
- Large cardboard boxes (or a sheet of plywood if you prefer a sturdier version)
- Pencil and ruler
- Craft knife or box cutter (adult use only)
- Cutting mat or thick cardboard to protect your work surface
- Hot glue gun and glue sticks (or strong craft glue)
- Acrylic paint in green shades, plus black and white for details
- Paintbrushes (various sizes)
- Clear packing tape or duct tape
- Rings: you can use store-bought ring toss rings, or make your own from rope or wire (see Tips)
- Optional: sandpaper, spray sealer (use outdoors in a ventilated area), and a wooden base for stability
Step-by-Step
- Design your cactus shape. On a piece of paper, sketch a simple cactus: a tall central trunk with two arms curving upward. Keep the design bold and simple—about three feet tall works well. The arms should be thick enough to hold rings (at least a few inches wide).
- Transfer the shape to cardboard. Lay your cardboard flat and draw the cactus outline using your sketch as a guide. Use a ruler for straight edges. If your cardboard isn’t large enough, tape two pieces together on the back before drawing.
- Cut out the cactus. With adult supervision, carefully cut along the outline with a craft knife. Work on a cutting mat. For safety, always cut away from your body and keep fingers clear of the blade. If you’re using wood, a jigsaw works better—ask an experienced adult for help.
- Make a base (optional but recommended). To help the cactus stand upright, cut a rectangular piece of cardboard about two feet long and one foot wide. Fold it in half lengthwise to create a tent shape, then tape or glue the cactus to the top of the tent. Alternatively, attach the cactus to a wooden dowel stuck into a flowerpot filled with sand or gravel.
- Prime the surface. If your cardboard has print or is shiny, give it a coat of white acrylic paint or gesso. This helps the green paint pop and covers any text. Let it dry completely.
- Paint the cactus. Use a medium green for the whole shape. Apply two coats for even coverage, letting each dry. While the paint is wet, you can blend in lighter and darker green patches for a more realistic look—just dab with a dry brush.
- Add details. Once the green is dry, paint white or light green lines down the center of each arm and the trunk to suggest cactus ridges. Add small black dots for spines (or paint tiny Xs). You can also paint a colorful flower on top of the cactus for charm.
- Seal the paint. If the game will live outdoors, spray it with a clear acrylic sealer to protect it from moisture. Do this outside and let it dry fully before handling.
- Prepare your rings. If you’re using store-bought rings, you’re ready. To make your own, cut a length of rope or thick wire about two feet long, form a circle, and secure the ends with tape or by twisting. For a softer version, you can braid old t-shirts into rings.
- Set up and play. Place the cactus on a flat surface. Mark a throwing line a few feet away (adjust for age and skill). Take turns tossing rings, aiming to loop them over the arms or the top. Award points: arms score two points, the top scores three, and the base scores one. First to a set score wins.
Common Mistakes
- Making the arms too thin. Rings need a decent target. If arms are narrower than a couple of inches, rings will rarely land. Keep them chunky.
- Skipping the base. A flat cardboard cactus will tip over easily. Always add a base or a weighted support.
- Using too much glue. Hot glue can warp thin cardboard. Apply glue in a zigzag pattern, not a thick blob.
- Painting before priming. If you skip the primer, the paint may peel or look dull, especially on glossy cardboard.
Tips
- Use a cardboard box from a large appliance—it’s thick and sturdy.
- For a more durable version, cut two identical cactus shapes and glue them together with a few cardboard spacers in between. This makes a 3D effect and is much sturdier.
- Let kids paint the cactus—it’s a great way to personalize it.
- If you’re using rope rings, make them slightly larger than the cactus arms so they can actually fit over them.
- Store the game flat when not in use. If you made a 3D version, you can cut it into sections and tape them together at the joints for easy storage.
Troubleshooting
- The cactus keeps falling over. Add more weight to the base: tape a heavy stone or a sandbag to the underside of the base. Or use a flowerpot filled with sand and insert the cactus into it.
- Paint is peeling. This usually happens if the surface was greasy or shiny. Sand the cardboard lightly with fine sandpaper, wipe off dust, and reapply primer. For future projects, use a primer spray.
- Rings bounce off. If your rings are stiff (like wire), they can bounce. Use softer rings (rope or cloth) or wrap the cactus arms with a thin layer of foam or felt to grip the rings.
- The cardboard bends. If the cactus is too flimsy, reinforce the back with a strip of cardboard glued vertically down the center. You can also cover the whole back with packing tape for extra rigidity.
- Rings won’t fit over arms. Make your rings larger, or trim the arms slightly. Test the fit before sealing the paint.
Frequently Asked Questions
Can I use this indoors?
Yes, it works great indoors. Just make sure you have enough space to toss rings safely. Avoid placing it near breakables.
How long does it take to make?
Most people finish in an afternoon, including drying time. If you use quick-dry paint and a glue gun, it can be done in a couple of hours.
What age is this suitable for?
Kids as young as five can enjoy playing, but the crafting part is best for ages ten and up with adult supervision, especially when using a craft knife.
Can I make it weatherproof?
Cardboard will not survive rain. For outdoor use, consider using plywood or a plastic cutting board. If you stick with cardboard, store it indoors when not in use, or cover it with a waterproof sealant.
What if I don’t have rings?
You can make rings from a wire coat hanger (bend into a circle and tape the ends), or use plastic bracelets, or even cut rings from a plastic container lid.
How do I make it more challenging?
Move the throwing line farther away, or make the rings smaller. You can also add a scoring system with bonus points for landing on the flower.