Cutting tree roots is sometimes necessary—for a new walkway, a patio, or to stop a root from buckling a sidewalk. Done carelessly, it can weaken or kill the tree. Done carefully, you can remove problem roots and keep the tree healthy. This guide explains how to assess the situation, choose the right roots to cut, and do the job with minimal harm.
What You’ll Need
- Sharp pruning saw or reciprocating saw with a pruning blade (for smaller roots)
- Loppers or hand pruners for very thin roots
- Shovel or spade for exposing roots
- Measuring tape or string to mark distances
- Protective gloves and safety glasses
- Clean, sharp knife or chisel to smooth the cut (optional)
- Rope or flagging tape to mark the area
Step-by-Step
- Identify the tree’s critical zone. For most trees, the critical root zone is roughly the area under the canopy (the drip line). Roots within this zone are essential for water and nutrient uptake. Cutting roots here is risky; cutting outside this zone is less harmful.
- Measure the distance from the trunk. A general rule: do not cut roots closer to the trunk than a distance equal to the tree’s diameter at breast height (DBH) multiplied by a factor of several (for example, if the trunk is 1 foot thick, keep cuts at least a few feet from the trunk). For safety, keep cuts as far from the trunk as possible—ideally beyond the drip line.
- Choose the right roots. Prefer to cut small-diameter roots (under a few inches) rather than large anchor roots. Large roots provide structural stability—removing them can make the tree fall in a storm. Also, avoid cutting roots on more than one side of the tree in the same year; this can severely stress it.
- Expose the root. Dig carefully around the root you intend to cut, using a shovel or spade. Remove enough soil to access the root fully, but avoid damaging neighboring roots. Keep the soil moist to make digging easier.
- Make a clean cut. Use a sharp saw to cut the root cleanly. Make the cut perpendicular to the root’s length, not at an angle. A clean cut heals faster than a ragged one. For very thick roots, you may need to cut in sections.
- Smooth the cut surface. If the cut is rough, use a sharp knife or chisel to smooth it. This helps the tree form a callus over the wound more quickly.
- Backfill the hole. Refill the excavation with the original soil, tamping gently to remove air pockets. Water the area lightly to settle the soil.
- Monitor the tree. Over the next few months, watch for signs of stress: wilting leaves, premature leaf drop, or dieback in the canopy. If you see these, consult a professional arborist.
Common Mistakes
- Cutting too close to the trunk. This removes the tree’s main support roots and can kill it.
- Cutting too many roots at once. Removing more than a small fraction of the root system in one season can be fatal.
- Cutting roots on multiple sides. This destabilizes the tree.
- Using a dull tool. A dull saw tears the root, making a ragged wound that heals slowly and invites disease.
- Leaving the root exposed. Exposed roots dry out and can be damaged by foot traffic.
- Ignoring the tree’s species. Some species (like oaks and beeches) are more sensitive to root damage than others. If unsure, ask a local expert.
Tips
- Do the work in late winter or early spring. Trees are dormant then, and they can start healing before the growing season.
- Water the tree well before and after cutting. This reduces stress and helps the tree recover.
- Consider root barriers. If you’re cutting roots to prevent future damage, install a root barrier (a physical barrier) to guide new growth away from the area.
- Mulch around the tree. A layer of mulch over the root zone helps retain moisture and protects roots from temperature extremes.
- If in doubt, call an arborist. For large roots or valuable trees, professional help is worth it.
Troubleshooting
- The tree shows wilting or leaf drop. This could mean you cut too many roots or cut too close. Water deeply and regularly. Consider having an arborist assess the tree. Do not fertilize—that can stress it further.
- The cut root is oozing sap or looks rotten. This may indicate disease. Keep the area clean, and consult a professional if it worsens.
- The tree leans after a storm. If you removed a major root, the tree may be unstable. Contact a professional immediately to evaluate the risk.
- You need to cut a root that is thicker than a few inches. For large roots, it’s safer to consult an arborist. They can assess the tree’s stability and decide if cutting is feasible.
- The root is under a sidewalk or driveway. In such cases, you might need to reroute the walkway instead of cutting the root. A professional can advise on options like bridging or root barriers.
Frequently Asked Questions
Can I cut any root and the tree will survive?
No. Cutting some roots, especially large anchor roots or those close to the trunk, can kill the tree. The tree’s survival depends on how many roots you cut, their size, and their location.
How much of the root system can I remove?
As a general guideline, avoid removing more than a small fraction (about a quarter) of the root system in a single season. Removing more increases the risk of death.
What is the best time of year to cut roots?
Late winter or early spring, while the tree is still dormant, is usually best. This gives the tree time to heal before the growing season.
Will the roots grow back?
Some trees will regrow roots from the cut end, but they may not re-establish as strongly. The tree will also grow new roots elsewhere if conditions are right.
Can I cut roots that are above ground?
Yes, but be careful. Surface roots are often important for stability. Cutting them can make the tree unstable. Also, avoid cutting roots that are visibly large or that flare at the base.
Should I use a root killer after cutting?
No. Root killers are for killing entire trees, not for pruning roots. Using one on a root you want to keep will harm the tree.