Cut Outs for Clothing: A Step-by-Step Guide

Cut outs for clothing are intentional openings or gaps in fabric that add visual interest, breathability, or a modern edge to a garment. They can range from small slits to larger geometric shapes, and they work on everything from tops and dresses to activewear. Making your own cut outs lets you customize a piece to your exact taste without buying new clothes. This guide walks you through the entire process, from planning to finishing, so you can create clean, professional-looking cut outs at home.

What You’ll Need

  • Garment or fabric piece to modify
  • Fabric marker, chalk, or tailor’s chalk
  • Sharp fabric scissors or a rotary cutter and cutting mat
  • Ruler or measuring tape
  • Straight pins (optional, for holding fabric in place)
  • Fusible interfacing or stabilizer (for knit or stretchy fabrics)
  • Needle and thread or a sewing machine with matching thread
  • Seam ripper (for removing stitches if needed)

Step-by-Step

  1. Choose the placement and shape. Decide where you want the cut out (e.g., back, sleeves, or side) and what shape it should be—oval, triangle, or a slit. Consider the garment’s seams and how the cut out will affect the fit. For beginners, start with a simple slit or a small oval.
  2. Mark the cut out area. Use a fabric marker or chalk to draw the shape directly on the wrong side of the fabric. Use a ruler for straight lines or a template for curves. Make sure the marks are visible but not too close to the edge—leave at least a few inches of fabric around the shape for seam allowance.
  3. Prepare the fabric (for knits or stretchy materials). If your fabric stretches, apply fusible interfacing to the wrong side of the fabric around the marked area. This stabilizes the fabric and prevents it from stretching out of shape when you cut. Follow the interfacing manufacturer’s instructions for heat and pressure.
  4. Cut out the shape. Using sharp scissors or a rotary cutter, carefully cut along the marked lines. For a slit, cut a straight line. For a shape, cut it out completely. If you’re making a shaped cut out, you can also cut a small hole first and then trim to the line.
  5. Finish the raw edges. The cut edges will fray or roll if left unfinished. The simplest method is to fold the edge under by about a quarter inch and sew a narrow hem. For curves, clip the seam allowance at intervals to help the fabric lie flat. Alternatively, use a serger or a zigzag stitch on a sewing machine to finish the edge. For a clean, modern look, you can also bind the edge with bias tape.
  6. Press and inspect. After sewing, press the cut out area with an iron to set the stitches and flatten any puckers. Try on the garment to check the fit and make sure the cut out is positioned as intended.

Common Mistakes

  • Cutting too large. It’s easier to make a cut out bigger than to fix one that’s too big. Start small and enlarge gradually.
  • Skipping stabilization on stretchy fabrics. Without interfacing, a knit fabric can stretch and distort when you cut and sew, leading to a wavy edge.
  • Not finishing edges. Leaving raw edges will cause fraying and the cut out to look unfinished. Always finish the edge, even if it’s just a simple zigzag.
  • Cutting through seams. If you cut across a seam, the garment may fall apart or the seam will be weakened. Plan your cut out to avoid seams or reinforce them before cutting.

Tips

  • Practice on a scrap piece of the same fabric first to test your technique and the finish you plan to use.
  • For a more polished look, use a contrasting thread or decorative stitch to finish the edge.
  • If you’re making a cut out in a delicate fabric like silk, use a fine needle and a smaller stitch length to avoid visible holes.
  • Consider the garment’s purpose: a cut out on a workout top should be placed where it won’t chafe or expose too much during movement.

Troubleshooting

  • The cut out looks uneven. If your cut out is lopsided, you can either trim it to make it symmetrical (if there’s enough fabric) or sew a small tuck to correct the shape. For a slit, you can add a small dart to adjust the angle.
  • The fabric is fraying. Apply a small amount of fray check (a liquid seam sealant) to the raw edges, or re-finish the edge with a wider zigzag stitch.
  • The cut out gapes or stretches out of shape. This often happens with knits. Reinforce the edge with a stay stitch (a straight stitch just inside the seam allowance) before finishing. If it’s already stretched, you can carefully sew a narrow hem to pull it in.
  • The cut out is too big. If you cut too much, you can insert a fabric patch underneath and sew it in place to close part of the opening. Or, you can add a decorative element like a lace insert or a zipper to make it intentional.

Frequently Asked Questions

Can I make a cut out in any fabric? Yes, but the technique varies. Woven fabrics are easier because they don’t stretch. Knits and stretchy fabrics need stabilization with interfacing to prevent distortion.

Do I need a sewing machine? No, you can hand-sew a simple hem or use fabric glue for a no-sew finish, but a sewing machine gives a more durable and professional result.

How do I keep the cut out from running? Finishing the edge with a hem, bias binding, or a serger will prevent the fabric from unraveling. For knits, a narrow zigzag stitch works well.

Can I make a cut out in a garment that already has a lining? Yes, but you’ll need to cut through both layers and finish each edge separately, or you can sew the layers together around the opening first.

What if I make a mistake? If the cut out is too small, you can enlarge it. If it’s too big, you can sew it partially closed or add a patch. If you’re unhappy with the result, you can always repurpose the fabric or add a decorative overlay.

Is it better to cut out before or after sewing the garment? It’s usually easier to cut out after the garment is sewn, because you can see the final fit and placement. However, if you’re making a cut out that needs to be sewn into a seam, you may need to do it during construction.

Cut Outs for Clothing: A Step-by-Step Guide

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to top