Cat Tree for Two Cats: Build a Double-Wide Tower

Building a cat tree for two cats means designing a structure that gives each cat its own space while also offering shared perches. The goal is to reduce squabbling over territory by providing multiple escape routes, several sleeping spots, and a stable base that won’t tip when both cats are on it. Before you start, measure the floor area where the tree will go and consider the ceiling height. You’ll also want to think about the temperament of your cats — some prefer high perches, others like enclosed cubbies. This guide walks you through building a sturdy, double-wide cat tree from scratch, with step-by-step instructions that assume you have basic DIY skills.

What You’ll Need

  • Two pre-cut wooden boards for the base and shelves (e.g., a large base board and several smaller shelf boards)
  • Four or more wooden posts (at least two inches in diameter, cut to various heights)
  • Carpet or sisal rope for covering posts and shelves
  • Staple gun with staples
  • Power drill with drill bits and screwdriver bits
  • Screws (long enough to go through boards into posts)
  • Wood glue
  • Measuring tape
  • Pencil
  • Saw (if you need to cut posts or boards to size)
  • Optional: fabric for a cozy cubby, a hanging toy, or a ramp

Step-by-Step

  1. Design your layout. Sketch a simple plan with two distinct zones. For example, one side can have a low perch and a cubby, the other a higher perch and a top platform. Make sure there are at least two routes to the top so cats can pass each other without a standoff.
  2. Cut your boards and posts. If your boards aren’t pre-cut, saw them to your desired shelf sizes. For the base, use a board that is wide and long enough to provide stability — a rectangle about twice as long as it is wide works well. Cut posts to different heights: one short (for a low perch), one medium (for a mid-level shelf), and one tall (for the top).
  3. Cover the base and shelves. Lay carpet or sisal matting on each board, wrap it around the edges, and staple it underneath. This gives cats traction and makes the tree more appealing. For shelves that will be used as perches, consider adding a soft fabric layer on top of the carpet for comfort.
  4. Attach the first post to the base. Apply wood glue to the bottom of a post and place it on the base where you want it. Pre-drill holes through the base into the post, then drive screws in from underneath. Make sure the post is vertical using a level.
  5. Add the first shelf. Position a shelf on top of the post, glue and screw it in place from above. This shelf should be lower than the final top, leaving room for another post above it.
  6. Build upward. Attach another post on top of that shelf, then add another shelf. Repeat until you reach your desired height. For a two-cat tree, aim for at least three levels, with one shelf that is wide enough for both cats to lie on side by side.
  7. Create the second zone. On the opposite side of the base, attach a separate post and shelf setup, but keep it lower than the main tower. This gives the second cat a place to retreat that is not directly in the path of the first cat.
  8. Add a cubby or hideaway. If you have a box or a pre-made wooden crate, attach it to one of the mid-level shelves. Cut a circular hole in the side for an entrance, and line the inside with a soft blanket. Secure it with screws from the outside.
  9. Wrap the posts with sisal rope. Starting at the bottom of a post, wrap the rope tightly, gluing or stapling the ends. This provides a scratching surface. Do this for all exposed posts, or at least the ones your cats are likely to use.
  10. Attach the top platform. The highest shelf should be large enough for a cat to stretch out. Secure it firmly with multiple screws, as this is the most-used perch.
  11. Add toys and ramps (optional). Hang a toy from a string under a shelf, or attach a small ramp between two levels to give older or less agile cats an easier route.
  12. Test for stability. Before letting your cats use it, push and pull the tree from various angles. If it wobbles, add more screws or a bracket to the base. You can also attach the tree to a wall with a safety strap (sold at pet stores) to prevent tipping.

Common Mistakes

  • Making the base too small. A small base makes the tree top-heavy and prone to tipping, especially when two cats are on it. Use a base that is at least as wide as the tallest shelf.
  • Not pre-drilling holes. Screwing directly into wood can split it, especially near the edges. Always pre-drill to avoid cracks.
  • Using too few screws. One screw per joint is not enough. Use at least two or three per connection, spaced apart.
  • Ignoring the ceiling height. A tree that is too tall for your room will not fit or will be unstable. Measure before you build.
  • Forgetting about escape routes. If there is only one path up and down, cats may feel trapped. Provide multiple routes by having branches or staggered shelves.

Tips

  • Use carpet that matches your home decor. This makes the tree blend in and reduces the visual clutter.
  • Place the tree near a window. Cats love to watch the outside, and this will encourage them to use the tree.
  • Introduce the tree gradually. Place treats or catnip on the shelves to attract your cats. Do not force them onto it.
  • Consider the age and health of your cats. Older cats may need lower perches and ramps instead of high jumps.
  • Use a level to ensure shelves are horizontal. A tilted shelf can make cats feel insecure.

Troubleshooting

  • The tree wobbles. Tighten all screws, add more screws to the base, or attach a wall bracket for extra stability.
  • Cats are not using the tree. Sprinkle catnip on the shelves, or place a favorite toy on a perch. You can also try moving the tree to a more social area of the house.
  • The posts are not straight. Unscrew the post, reapply glue, and reattach, using a level to check alignment.
  • Sisal rope is unraveling. Staple the ends securely, or use a hot glue gun to seal the edges.
  • One cat is hogging the tree. Add more perches or a second cubby to give the other cat a place to retreat. You can also train them to take turns by using treats.

Frequently Asked Questions

Q: How tall should a cat tree for two cats be?
It depends on your ceiling and your cats’ preferences. A tree that is several feet tall is usually enough, but make sure it does not exceed the ceiling height. Cats like to be high, but they also need to jump safely.

Q: Can I use a ready-made cat tree instead of building one?
Yes, but ready-made trees may not be as sturdy or as tailored to your space. Building your own allows you to customize the height, width, and features.

Q: How do I clean the cat tree?
Vacuum the carpet regularly to remove fur. For stains, use a pet-safe cleaner. Sisal rope can be wiped with a damp cloth.

Q: How do I get my cats to stop fighting over the tree?
Provide separate sleeping spots and multiple routes to the top. You can also use calming pheromone sprays, but the best solution is to ensure each cat has its own space.

Q: Is it safe to have a cat tree near a window?
Yes, but ensure the tree is stable and not blocking an escape route. If the window is open, make sure the tree does not give access to an unscreened window.

Q: What if my cat is too old to jump?
Add ramps or steps between levels. You can also attach a soft bed at the bottom of the tree for easy access.

Cat Tree for Two Cats: Build a Double-Wide Tower

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to top